Showing 1–12 of 45 results
AC Hipot Test System | MT-HPTAC
AC Hipot Test System | MT-HPTAC; Testing of power for electrical equipment, apparatus or machines is achieved effectively and directly. It checks dangerous defects that ensure continuous operation of electrical devices.AC hipot testing, also known as high potential testing, is a crucial procedure used to evaluate the dielectric strength and insulation integrity of electrical equipment. This testing is essential for ensuring the safety and reliability of devices operating at high voltages.
DC Winding Resistance Tester | MTS-TWR-CP10
DC Winding Resistance Tester | MT-TWR-CP10; It is used for winding resistance measurement. Transformers, common inductors, reactors, electromagnetic operating mechanisms, etc. It is a necessary test for semi-finished products, finished factory tests, installation, handover tests and preventive tests of the power industry in the manufacture of inductive coils.
DEVICE INTRODUCTION VIDEO
DVDF Test System 30kVA | MT-DVDF 30kVA (For transformer Inductive Withstand Voltage Testing)
DVDF Test System 30kVA | MT-DVDF 30kVA (For transformer Inductive Withstand Voltage Testing); is specially designed and manufactured for the power transformer production or maintenance department to do the frequency doubling induction withstand voltage test power supply. The continuous operation time is allowed not to exceed 4 hours. The output frequency is 150Hz, and the maximum load transformer capacity is 3150kVA. An intermediate transformer is required when the voltage on the low-voltage side of the transformer exceeds 400V.
No Load Loss Tester | MTNL-30
During the test, the high voltage windings are left open circuit by applying the rated voltage to the low voltage terminals of the transformer. No Load Loss Tester | MTNL-30; It is applied to measure the iron losses that occur during idle (unloaded) operation of the transformer. https://youtube.com/shorts/Mv-N5P79D7s?si=Ir7E1LU4zpGpy12z
DEVICE INTRODUCTION VIDEO
DEVICE SHORT VIDEO
Portable Power Supply | MT-BGK24-220
Portable Power Supply | MT-BGK24-220; energy storage stations all-in-one options include mini TV, CPAP, MacBook, Laptop, to be used in various outdoor organizations such as the beach during your holidays, weekend camps, picnic organizations, caravan camping and holidays. It is a great choice.
DEVICE SHORT INTRODUCTION VIDEO
DEVICE INTRODUCTION VIDEO
Transformer Routine Test Leakage Tester | MT-STC
According to TS EN 60076-1 Standard; The transformer manufacturer must carry out an agreed test to prove that the transformer tank will not leak during operation. If there is no agreement, a pressure of at least 30 kPa above the normal liquid pressure should be applied and this pressure should be maintained for 24 hours for transformers with declared value greater than 20 MVA or 72.5 kV and for 8 hours for transformers with lower declared power and voltage. Typically this pressure is applied to the housing using a column of liquid or gas pressure. The entire transformer should then be visually inspected to determine if there are any leaks. Transformer Routine Test Leakage Tester | MT-STC ; The transformer in question carries out routine leakage testing.
