Tester For Cordless Products meets the standards of EN/IEC 60335-2-14 Clause 22.103, EN/IEC 60335-2-3 Clause 22.105, EN/IEC 60335-2-15 clause 22.103.

Tester For Cordless Products EXPLANATION

This device is used to test the resistance of appliance couplers of cordless appliances to pressure that may occur during normal use.

In addition, this device is designed to verify whether the electrical and mechanical failures of the connection contacts of the cordless irons in normal use cause a hazard.

FEATURES

Make the two contacts of cordless electric kettles, cordless irons, cordless blenders to be short-circuit, and supply 1.1 times of rated voltage to cordless electric kettle/ iron/ blender, then process the endurance test that the test sample’s body insert into and plug from the base at the speed of 10 times/min. And then process a certain times of insert & plug endurance test without load voltage. The test device can be connected to external load or has built-in load (optional), the test cycles can be preset (maximum 999999)，the test system can record the test cycles and conduction cycles automatically during test, when the preset test cycles have been completed, the test device will stop testing automatically.

Technical Parameters

Power Supply	AC220V 50HZ
Control	PLC control, touch screen operation
Station	Single Station
Drive Method	Motor-driven
Test Sample	Cordless water kettle/iron/blender
Insert & Plug Stroke	0-100mm，can be preset on touch screen
Insert & Plug Speed	0-30 times/min, can be preset on touch