Cord Anchorage Force & Torque Tester meets the standard of EN/IEC 60335-1 Clause 25.15 Cord Anchorage Force & Torque Tester is designed to verify whether the cord anchorage used in the appliances provided with a flexible cord protects the conductors at the terminals from excessive stresses and protects the conductive insulation against abrasion.
Cord Reel Tester meets the standard of EN/IEC 60335-1 Clause 22.16. It is used to check the automatic cord reels shall be constructed so that they do not cause – undue abrasion or damage to the sheath of the flexible cord; – breakage of conductor strands; – undue wear of contacts.
Cylindrical Mass Dropping Apparatus designed to dropping the cylindrical mass specified in the standards of EN / IEC 60335-2-4, Clause 21. 101 and EN / IEC 60335-2-7 Clause 21.101.1. The drop height is 100 mm.
Electric Teapot Tester meets the standard of EN/IEC 60335-2-15, Clauses 19.101 and 19.102. Electric Teapot Tester is designed to detect conditions that occur during abnormal operation of kettles
Flexing Test Apparatus meets the standards of EN/IEC 600335-1 Clause 25.14 Figure 8, EN/ IEC 60335-2-3, EN/ IEC 60335-2-8, EN/ IEC 60335-2-14 and EN/ IEC 60335-2-23. Flexing Test Apparatus is designed to verify that the household electrical appliances provided with a supply cord and that are moved while in operation in accordance with their standards are manufactured in such a way as to provide adequate protection against excessive flexing where it enters the appliance.
Impulse Voltage Tester meets the standard of EN/IEC 60335-1 Clause 14, It is used to detect the transient over voltage of the components and the electrical clearance and the creepage distance.
Inclined Plane meets the standard of EN/IEC 60335-1 Clause 20.1. Inclined Plane is designed to verify whether the appliances intended to be used on floor or table type surfaces have adequate stability.
Ironing Dropping Apparatus meets the standard of EN/IEC 60335-2-3 Clause 21.101. It is used to mechanical strength test of the electric iron.
Load for Testing Rotating Spits meets the standards of EN/IEC 60335-2-9 clause 18.104.22.168 figure 102 and EN/IEC 60335-2-6 clause 22.214.171.124 figure 103. Load for Testing Rotating Spits is designed to simulate the food to be cooked by attaching to rotary grills in the ovens or grills during heating tests.
Microwave Ovens Price Durability Test Device meets the standard of EN/IEC 60335-2-25 clause 18. Microwave Ovens Price Durability Test Device is used for mechanical endurance test to microwave oven door system includes a hinge structure, microwave seals and other related components
Scratch Tester meets the standards of EN/IEC 60335-1 clause 21.2 and EN/IEC 60950 clause 126.96.36.199 Scratch Tester is designed to test whether accessible parts of the solid insulation are scratched and have sufficient strength to prevent the penetration of sharp implements. Scratch Tester can also be used to check the abrasion resistance of printed coated circuit boards.
Test Corner meets the standard of IEC60335-1 clauses 11.2 and 11.3. It is used for the temperature rise test of some heating appliances, motor-operated appliances and combined appliances to meet the requirements of the environmental conditions.