Showing 1–12 of 18 results

Flame Height Gauge | MTNFEM

Flame Height Gauge | MTNFEM; Flame height gauge.

Flame Height Gauge | MTNFEM-1

Flame Height Gauge | MTNFEM-1; Flame height gauge.

Flame Height Gauge | MTNFEM-2

Flame Height Gauge | MTNFEM-1; Flame height gauge.

Ball Pressure Apparatus | MT-BP1

Ball Pressure Apparatus meets the standard of EN/IEC 60695-10-2, Clause 5.1, Figure 1. The ball pressure test as a method for evaluating the softening temperature and accelerated material flow under load of polymeric materials and parts of end products in their ability to resist abnormal heat.

Foam Horizontal Burning Tester | MT-HVF5

Foam Horizontal Burning Tester is designed to perform horizontal combustion tests for the relative combustion characteristics of small plastic foams with a density not exceeding 250 kg / m³ according to ISO 845 and UL94 standard.

Glow Wire Test Apparatus

Glow Wire Test Apparatus meets EN/IEC 60695-2-10, Figure 1, Figure 2, Figure 3 and Figure 4. It is suitable for the tests specified in EN / IEC 60695-2-11, EN / IEC 60695-2-12 and EN / IEC 60695-2-13. It is used in fire hazard testing of insulation materials used in all products belonging to electrotechnical sector.
DEVICE INTRODUCTION VIDEO

Glow Wire Test Apparatus | MTC-GWE100

"Glow wire test method" and other standard design and manufacturing requirements in IEC60695-2-10 ~ 13 , IEC60335-1 , IEC60884-1 , IEC60598-1 , IEC60950 , UL746A, electrical and electronic products, electrical appliances and fire hazard test materials, the simulation heat element or the heat caused by the heat or the overload resistance of the ignition source.
DEVICE INTRODUCTION VIDEO
DEVICE SHORT VIDEO

High Current Ignition Tester | MT-HCI1E

High Current Ignition Tester conforms to standard requirement of IEC 60950-1, BS 7002, UL746A, IEC 60947-1 and IEC 730-1.. It is suitable for Arcing resistance test of electric and electronic products, household appliances and its materials.

Horizontal and Vertical Burning Tester | MT-HVB

Horizontal and Vertical Burning Tester is used for horizontal and vertical burning test of plastic material components. IEC60950-1, UL94, IEC60707, IEC60695-2-2, ISO1210, ISO 13387-1 etc. It is designed and made according to the relevant requirements of the standards. Tests electrical equipment and tools, extent of damage, linear burn rate, and residual flame.

Horizontal and Vertical Combustion Tester | MT-EWH1

Horizontal and Vertical Combustion Tester is designed to perform vertical and horizontal flame propagation tests in accordance with UL 1581 and related standards.

Horizontal Vertical Flame Tester | MT-HVF3

Horizontal Vertical Flame Test Apparatus is designed and manufactured according to the standards of IEC 60695-11-3, IEC60695-11-4, IEC 60695-11-10, IEC 60695-11-20.
DEVICE INTRODUCTION VIDEO

Hot Wire Ignition Tester | MT-HWI1

Hot Wire Ignition Tester is designed for the flammability test of materials with hot wire winding according to EN/IEC 60695-2-20. Related standards: EN/IEC 60950-1 and EN/IEC 60947.