Bare wire mandrel winding and torsion tester is used for copper rods, aluminium rods, steel wires mandrel winding and torsion tests under the specified torsion speed; as well as test of broken resistance strength and torsion frequency performance for different metal wires, and toughness and adhesion performance for overhead wire and galvanized steel wire. Test method is to clamp the both ends of the specimen, one end is fixed and the other end 360º continuously twisted.
Bridge fixture in line with the amended GB/T 3048 standard requirements of conductor resistance test: The distance from each end of the potential fixture head and the current fixture head is not less than 1-5 times of sample cross-section perimeter, according to usage, it is sorted as bare conductors series and stranded conductors series.
Bunched Cable Vertical Flame Spread Tester tester is used to detect vertically mounted under specified conditions for vertical flame spread inhibiting the ability of bundle cable or fiber optic cable.
Cable Semi Conducting Rubbers and Plastics Resistivity Tester a microcomputer controlled test instrument applied to test the volume resistivity of rubbers and plastics. It is based on the microcomputer principles, automatically test the semi-conducting rubbers and plastics volume resistivity, after testing the resistance, and then input the sample thickness values, the instrument automatically displays the volume resistivity measurement values. No need to manual calculations, with features of high accuracy, good stability, compact structure, and easy to operate. It is the best test instrument for it so far.
Cold Bend Test Apparatus conforms to the standard requirements of IEC540. It is used for cold bend test of the circular insulation wire core whose diameter is small and the sector-shaped insulation wire core which cannot be used for dumbbell. The apparatus shall be held in a refrigerator before and during the test. The diameter of the mandrel shall be between 4 and 5 times the diameter of the test piece (see below).The mandrel shall be uniformly rotated at a rate of one revolution in about 5 s and the number of turns shall be as specified in the following table.
Cold Tensile Testing Equipment, conforms to the standard requirement ofIEC60811-1-4 clause 8.3 and 8.4, common test methods for insulating and sheathing materials of electric and optical cables-part 1-4:Methods for general application-Test at low temperature. It is applicable for the insulating sheath of the high polymer material, electric wire, rubber, and plastic to do the tensile test at the environment of -35°~0°.
Computer-controlled electronic tensile tester (large deformation) is widely used for hardware, metal, rubber and plastics, footwear, leather, clothing, textiles, insulators, wires, cables, terminals and other types of materials, to test tensile, tear, peel, compression, bending and other materials research and development, inspection and test, with multiple functions, wide range of uses. The computer-controlled electronic tensile tester (large deformation) is adopted aluminium alloy enclosure, with lightweight body, beautiful appearance.
Digital Profile Projector high-precision projector is a highly efficient measuring instrument integrating light, machine and electricity. It can be widely used for industries such as mold manufacturing, metal work pressing, electronics, instrument, horologe, as well in universities, research institutes and metering examination departments.
Environmental Stress Cracking Resistance Test Apparatus used for determination of the environmental stress-cracking resistance of ethylene plastics, which is designed and manufactured in line with ASTM D1693 standard <Test Method for Environmental Stress-Cracking of Ethylene Plastics> and related Japanese standards.
Flexible Cable Stretching Tester meets the standard of EN/IEC 60245-2 Clause 3.1 Figure 1. It is designed to test the mechanical strength of flexible cables.
High Frequency Spark Tester designed to test the adequacy of cable insulation according to IEC 62230 standard. The cable is placed on the production line and it ensures fast deterioration of the cable insulation, holes, errors that may occur during production and with high precision.
Hot set test device is used in conjunction with the high-temperature oven, specimens are hung in the device and placed in an oven, and put the weights on the lower grip of specimens, after 10 minutes, measure the distance between the marks and calculate the elongation
Infrared heating aging oven is applicable for wires, leathers, plastics, rubbers, textiles changing properties before and after being heated. For the wires, it is used to maintain the fresh air inside the chamber and a special regulation of ventilation when being heated.
Insulation Splitting Machine for XLPE Cables designed to cut test specimens from the cable insulation to the required dimensions for use in mechanical and physical property tests of XLPE cables with rated voltage of 35 kV and lower.
Intelligent digital resistance bridge is an upgraded version of traditional intelligent conductor resistance testing machine, which is a comprehensive test system, comprising functions of a DC bridge, a amplifying galvanometer, constant current source and standard resistors and other accessories.
Laser Diameter Gauge | Dual Axis Measurement cable, wire, hose, pipe, strip, glass etc. from the extrusion machine in the production line. It is designed for double measurement of diameter measurement of transparent or non-transparent materials. It can control the working speed of the extrusion machines so that the products coming out of the production line are of the desired diameter.
Laser Diameter Gauge | Single Axis Measurement, cable, wire, hose, pipe, strip, glass etc. from the extrusion machine in the production line. It is designed for double measurement of diameter measurement of transparent or non-transparent materials. It can control the working speed of the extrusion machines so that the products coming out of the production line are of the desired diameter.
LCD servo-type universal tester (double columns) is used for tensile, compression, bending, cutting tests, as well as elongation, tensile strength tests for cable and tension force and stretching force test for textiles, leather, which adopted advanced machinery, SCM and computer technology to record the load of the sample, the variable displacement and time change curve, to research the material property and control the quality during manufacturing.
Lift cable flexibility tester is based on the current needs of the international market, the addition of the new standard GB/T5023.6-2006: Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V--Part 6: Lift cables and cables for flexible connections test apparatus
Low Temperature Test Chamber conforms to IEC540 standard which is applicable for the low temperature test of the electric wire and electrical accessories.
Microcomputer Tensile Testing Machine applicable for the electric wire, metal, non-metal, rubber and building materials to do the test of stretch, extension, stripping, displacement and tearing. It conforms the standard requirements such as IEC 60811-1-4, IEC 60245 and IEC 60227.
Plate Vulcanizing Machineis a basic tool to produce compounding in factories.
Precision Cable Resistance Meter designed for high precision measurement of the resistance of cables or other conductors by applying DC current in accordance with TS EN 60245-1.