Electrical Safety Tester Desktop are designed for AC Hi-pot, Insulation Resistance, Ground Bond Resistance, Leakage Current, Running Power and Low-Voltage Start up tests.
These testers are used to perform the following electrical safety tests required in international standards:
– Ground Bond Resistance Test,
– Insulation Resistance Test,
– AC Hi-pot Test,
– Leakage Current Test.
Related standards: IEC60335, IEC60950, IEC60601, IEC61010, IEC60598, IEC60204, etc.
Features
- ground bond test up to 64A AC with resistance measurement up to 600mΩ
- insulation test with DC Voltage from 1V up to 1000 VDC (1V steps)，500VA AC Hi-pot capacity(AC 5KV/100mA),short-circuit output current exceeds 200mA.Built-in optional leakage current test network MD card, meeting requirements of different industrial standards Maximum test current of Ground Bond resistance is up to 64A
- leakage current measurement in single or three phases, according to all current international standards
- AC Hi-pot, Insulation Resistance, Ground Bond resistance, Leakage Current, Running Power, Low-Voltage Start.
- power measurement and cos φ measurement
- Satisfy latest requirements: Follow the production line developing trends of comprehensive, fast, automation and information. Satisfy quality management,5s management and refit management requirements.
- GPIB, RS232, Ethernet, 0-10V, PLC available
- ESRS software for quality purposes, traceability and professional reporting
Electrical Safety Tester Desktop Technical Parameters:
AC Hipot test |
||||||
| Booster rated output capacity | AN9640A(F)E | 500VA（5000V/100mA) | ||||
| AN9640B(F)E | 100VA（5000V/20mA） | |||||
| Booster maximum short-circuit current | >200mA | |||||
| Output waveform | Sine wave, <3%（pure resistance，5000V/1mA），<3%（From empty load to full load） | |||||
| distortion and regulation | ||||||
| Output voltage setting | Range | 500～5000V | ||||
| Resolution | 5V | |||||
| Accuracy | ±（3%×setting+10V） | |||||
| Frequency setting | Range | 50Hz/60Hz | ||||
| Accuracy | ±0.1%×setting | |||||
| Alarming limits setting | Current upper-limit | 0.10～99.99mA(20.00mA for AN9640B/C(F)) | ||||
| Current lower-limit | 0.00～10.00mA | |||||
| Compensation current setting | Range | 0.00～10.00mA, automatic testing, compensation can be set to ON/OFF | ||||
| Time setting | Range | 1～999s | ||||
| Ramp up time range | 1～100s | |||||
| Accuracy | ±（0.1%×setting+1count） | |||||
| Breakdown current alarm | Range | 0.10～99.99mA(20.00mA for AN9640B/C(F)) | ||||
| Accuracy | ±（3%×reading+3counts） | |||||
Insulation Resistance test |
||||||
| Rated output capacity | 2VA（1000V/2mA） | |||||
| Output voltage regulation | <3%（From no load to full load） | |||||
| Output voltage ripple | <1% | |||||
| Output voltage setting | Range | DC 500Vor1000V | ||||
| Accuracy | ±（3%×setting+3counts） | |||||
| Alarming limits setting | Resistance upper-limit range | 0.0～99.9 MΩ，100～2000MΩ（If upper-limit is set to 0, it will not make adjustment for upper limit ） | ||||
| Resistance lower-limit range | 0.3～99.9 MΩ, 100～2000MΩ | |||||
| Time setting | Range | 1～999s | ||||
| Accuracy | ±（0.1%×setting+1count） | |||||
| Insulation resistance measurement | Range | 0.0～99.9 MΩ, 100～2000 MΩ | ||||
| Accuracy | ≤200MΩ: ±（3%×reading+3counts） | |||||
| Remarks：Except 500V and 1000V voltage points, other voltage accuracy are all 10%. Insulation resistance accuracy is under temperature 0～40℃ ， humidity 40℃/（20～75）% RH，otherwise the accuracy will change. | ||||||
Ground Bond Resistance test |
||||||
| No load output voltage | <12V | |||||
| Output current setting | Range | 3～30A | ||||
| Accuracy | ±（3%×setting+0.2A） | |||||
| Current frequency setting | Range | Sine waveform 50Hz/60Hz | ||||
| Accuracy | ±0.1%×setting | |||||
| Test time setting | Range | 1～999s | ||||
| Accuracy | ±（0.1%×setting+1count） | |||||
| Result display mode | Ground resistance or voltage | |||||
| Ground resistance display mode： | ||||||
| Alarming limits setting | Resistance upper-limit range | 3A≤output current≤10A:10～600 mΩ | ||||
| Resistance lower-limit range | 0～100 mΩ | |||||
| Compensation resistance setting | Range | 0～200 mΩ, automatic testing, compensation can be set to ON/OFF | ||||
| Ground bond resistance measurement | Range | 10～600 mΩ | ||||
| Accuracy | ±（3%×reading+ 5counts） | |||||
| Ground voltage display mode: | ||||||
| Alarming limits setting | Voltage upper-limit range | 30～7500 mV | ||||
| Voltage lower-limit range | 0～3000 mV | |||||
| Compensation voltage setting | Range | 0～1000 mV, automatic testing, compensation can be set to ON/OFF | ||||
| Ground bond resistance measurement | Range | 10～7500 mV | ||||
| Accuracy | ±（3%×reading+ 50mV） | |||||
DUT power control |
||||||
| DUT input power requirements | Leakage current, running power and voltage start test, user shall provide the correct input power input to safety tester, recommend to use AN97 frequency conversion power supply | |||||
| Input voltage, frequency | 0～300V（phase voltage）, 45～65Hz | |||||
| Isolation transformer output voltage ratio | Leakage current test | 1.06 times rated voltage | ||||
| Running Power test | 1.00 times rated voltage | |||||
| Voltage start test | 0.85 times rated voltage | |||||
| DUT Capacity | Single phase, AN9640A(F) load capacity is 6 KVA | |||||
| AN9640B(F)/AN9640C(F) load capacity is 2KVA | ||||||
| Over current protection | Max current 30A, after the over current 5s，automatically cut off the isolation transformer. | |||||
Interface |
||||||
| Remote interface | Standard, foot pedal(start/stop) | |||||
| Alarming lamp interface | Standard, 3 colour light（test pass/fail） | |||||
| Communication interface | Standard RS232，internet, RS485, GPIB optional | |||||
| 97 Power supply control interface | Standard，combine with AN97 series frequency conversion power | |||||
| PLC interface | Optional, start、stop、test、pass、fail output | |||||
| Printer interface | Optional | |||||
| Gross Weight | About 50kg | |||||
| Dimension | With packing | 600(W)x385(H)x820(D) | ||||
| Without packing | 426(W)x 178(H)x 600(D) | |||||
