- The AC Hipot Test allows you to stress your product’s insulation with high voltage to ensure it will limit current flow should a fault occur.
- Output 100 mA of AC Hipot/Dielectric Withstand test current. Ainuo AN Series meets the 200 mA short circuit requirement for 500 VA Hipot Testers.
- The DC Hipot Test allows you to stress your product’s insulation and limit leakage current output by running a DC dielectric withstand test.
- The Ground Bond,Verify the integrity of your product’s protective earth ground conductor to prevent electric shock should a fault occur.
- The The Ground Continuity,Verify the presence of your product’s protective earth ground conductor to prevent electric shock should a fault occur.
- The Insulation Resistance,Determine the total resistance of your product’s insulation.
- The Leakage Current,Ensure your product’s leakage current remains at acceptable levels during 8 different fault conditions.
- The Functional Run,Verify that your product is working properly before shipment.
DESCRIPTION OF PRODUCT
The new Ainuo AN96 series safety tester has integrated seven functions (seven-in-one: AC withstand voltage, DC withstand voltage,insulation resistance, ground bond resistance, leakage/contact current, operating power, low voltage start-up, providing safety test solutions for household appliances, energy-saving lamps, medical devices, information equipment, electric vehicles, photovoltaic energy, power electronics and other industries, and innovative solutions for various intelligent automated tests.
PRODUCT FEATURES
- Precise: basic Accuracy: 1%; Accuracy of electrical parameters: 0.2%;
- Fast: Accurate testing within 0.5s, 0.1s fast switching, high-speed communication, high efficiency.
- Integration: integrate safety performance and electrical performance seven functions in one, one-key start for a station;
- Intelligent: Built-in 100 groups of test conditions, barcode recognition, automatic matching of test program.
- Automation: RS232(standard)/RS485/GPIB/LAN ports, barcode scanning interface, frequency conversion power control interface, easy to form an automated test system.
| AN9640BV(F) Electrical Safety Comprehensive Analyzer | ||
| Features | Technical indicator | |
| AC WITHSTAND VOLTAGE TEST | ||
| Rated output capacity | 500VA（5000V/100mA），short-circuit current more than 200mA | |
| Output voltage | range/accuracy | 100～5000V，±（2%×setting +5 counts） |
| Output frequency | range/accuracy | 50Hz or 60Hz，±0.1%×setting |
| Alarm current setting | Upper limit range/accuracy | 0.10～40.00mA，±（2%×setting +5counts） |
| Lower limit range/accuracy | 0.10～40.00mA，±（2%×setting +5counts） | |
| Time setting | Range of test time | 0.5～999.9s（0 is infinite） |
| Range of ramp-up time | 0.1～999.9s | |
| Range of ramp-down time | 0.1～999.9s | |
| Time setting accuracy | ±（1%×setting + 1count） | |
| Measurement meter | Voltage range/accuracy | 0.01～5.00kV，±（1%× reading +1 count） |
| Frequency range/accuracy | 50Hz or 60Hz，±0.1%×reading | |
| Current range/accuracy | 0.10～40.00mA，±（1%×setting +5 counts）( | |
| Time range/accuracy | 0.1～999.9s，±（1%×reading +1 count） | |
| Output voltage waveform/degree of distortion/ Regulation rate | Sine wave，＜2%（pure resistance load），
＜（1%×setting+5V）（from no-load to full-load） |
|
| Initial voltage setting | （0%～50%）×Output voltage setting | |
| Current compensation setting | 0.000~ 10.00mA，Outomatic | |
| Arc detection | 1~9 levels, level-9 corresponds to the most sensitive, 0 is Off | |
| DC WITHSTAND VOLTAGE TEST | ||
| Output voltage | Range/accuracy | 100～6000Vdc，±（1%×setting+5 counts） |
| Alarm current setting | Upper limit range/accuracy | 0~10000μA，±（1%×setting +5 counts） |
| Lower limit range/accuracy | 0~999.9μA，±（1%×setting +5 counts） | |
| Time setting | Range of test time | 0.5～999.9s（0 is infinite） |
| Range of ramp-up time | 0.4～999.9s | |
| Range of ramp-up time | 1.0～999.9s（0 is off） | |
| Accuracy | ±（1%×setting +1 count） | |
| Measurement meter | Voltage range/accuracy | 0.01～6.00kVdc，±（1%×reading +5 count） |
| Current range/accuracy | 0.0～10000µA，±（1%×reading +5 counts） | |
| Time range/accuracy | 0.1～999.9s，±（1%×reading +1 count） | |
| Rated output capacity | 60VA（6000Vdc/10mA） | |
| Output adjustment level | ± (1%×setting +5 V), empty load to full load | |
| Compensating current setting | 0 ~200.0μA，automatic, manual | |
| Initial voltage setting | （0%～50%）× setting Output voltage | |
| Lower limit current for charging | （0~350）μA，automatic, manual | |
| Discharging time | ≤200ms | |
| Arc detection | 1~9 levels, level-9 corresponds to the most sensitive, 0 is Off | |
| INSULATION RESISTANCE TEST | ||
| Output voltage | Range/accuracy | 100～2500Vdc，±（1%×setting +5V） |
| Alarm resistance setting | Range of upper/lower limit | 1～50000 MΩ
The upper limit includes no upper setting |
| Accuracy | Range:
1 MΩ~50.00GΩ Resolution: 0.001MΩ /0.01MΩ /0.1MΩ /0.001GΩ /0.01GΩ Error: 100V~499V:0.100MΩ~2.000GΩ, ± (5%× reading +2 words) 500V~2500V: 0.100MΩ~999.9MΩ, ± (2%× reading +2 words) 1.000GΩ~9.999GΩ: ± (5%× reading +2 words) 10.00GΩ~50.00GΩ: ± (15%× reading +2 words) |
|
| Time setting | Range of ramp-up time | 0.1～999.9s |
| Range of delay time | 0，0.5～999.9s（0 is infinite） | |
| Range of test time | 1.0～999.9s，off | |
| Range of ramp-down time | 1.0～999.9s，off | |
| Setting accuracy | ±（1%×setting +1 count） | |
| Measurement meter | Voltage range/accuracy | 100～2500Vdc，±（2%×reading +5 counts） |
| Resistance range/accuracy | Range:
1 MΩ~50.00GΩ Resolution: 0.001MΩ /0.01MΩ /0.1MΩ /0.001GΩ /0.01GΩ Error: 100V~499V:0.100MΩ~2.000GΩ, ± (5%× reading +2 words) 500V~2500V: 0.100MΩ~999.9MΩ, ± (2%× reading +2 words) 1.000GΩ~9.999GΩ: ± (5%× reading +2 words) 10.00GΩ~50.00GΩ: ± (15%× reading +2 words) |
|
| Time range/accuracy | 0.1～999.9s，±（1%×reading +1 count） | |
| Lower limit current for charging | 0~3.500μA，automatic, manual | |
| GROUNDING RESISTANCE TEST | ||
| Rated output | Max output is 32A, max testing resistance 600mΩ，open-circuit voltage <12V | |
| Output current setting | Range/accuracy | 2.0～32.0A±（1%×setting +2 counts） |
| Output voltage setting | Range/accuracy | 3.0~10.0V ，±(1%×setting +2 counts) |
| Output frequency setting | Range/accuracy | sine，50Hz or 60Hz，±0.1%×setting |
| Alarm limit setting | Range of resistance upper/lower limit | Range: (0.1~600) mΩ, (2.0~10.6) A; (0.1~R) mΩ, (10.7~32.0) A. Resolution: 0.1/1 mΩ
Where R= (6400 / current setting ) mΩ |
| Error | Error: ± (1%× setting +2 words) | |
| Compensation resistance setting | Range | 0～200 mΩ，automatic measurement, compensation on/off |
| Test time setting | Range/accuracy | 0.5～999.9s（0=infinite）；±（1%×setting +1 count） |
| Measurement meter | Current range/accuracy | 2.0～32.0A，±（1%×reading+2 counts） |
| Voltage range/accuracy | 3.0~7.5V ，±(1%×reading +2 counts) | |
| Resistance range/accuracy | Range: (10.0~99.9) mΩ. (100~600) mΩ. Resolution: 0.1/1 mΩ.
Error: ± (1%× reading +2 words)
|
|
| Time range/accuracy | Range: 0, (0.5~999.9) s, 0: infinite. Resolution: 0.1s. Accuracy: ± 0. 1%× setting + 2 word) | |
| LEAKAGE CURRENT TEST | ||
| Test Mode | Single phase load, leakage current at operating temperature (dynamic) and leakage current at non operating temperature (static), L G, N G, AUTO (G L, G N); Require external isolation transformer or inverter power to provide the required test voltage and frequency. | |
| Working power state | Polarity: On, Off, Auto; Zero line: On, Off; Earth line: On, Off | |
| Built in human network | Polarity switch: | |
| Setting of alarm voltage | Range: 20.0V~300.0V AC. Resolution: 0.1V. Error: ± (0.4%× setting +0.1%× ra
nge) |
|
| Voltage measurement | Range: 0.0V~300.0V, 45Hz~65Hz
Accuracy: 20.0V~300.0V: ± (0.4%× reading +0.1%× range) |
|
| Load current | Upper limit: 30A | |
| Settings of Touch/Leakage
current upper/lower limit (rms) |
Range: 0.0μA~12.00mA. Resolution: 0.1μA /1μA /0.01mA
Error: DC, 15Hz≤f≤100kHz: ± ( 1.5 %× setting 10 words) 100kHz f≤1000kHz: ±5%× setting |
|
| Touch/leakagecurrent
measurement (rms) |
0.0μA~999.9μA: D C, 15Hz≤f≤100kHz: ± ( 1.5 %× reading 10 words)
100kHz f≤1000kHz, 10.0μA 999.9μA: ±5%× reading 1000μA~7999μA: DC, 15Hz≤f≤100kHz: ± ( 1.5 %× reading 10 words) 100kHz f≤1000kHz, 10μA 7999μA: ±5%× reading 8.00mA~12.00mA: DC: ± ( 1.5 %× reading 10 words) 15Hz≤f 1000kHz, 0.01mA~12.00mA: ±5%× reading |
|
| LC Compensation | Range: 0.000~1.000mA, Auto measurement, On or Off. | |
| Duration | Range: 0, (1 ~999.9), 0: infinite. Resolution: 0.1s. Accuracy:± 0. 1%× setting + 2 word), (for testmode AUTO (G L, G N): half of the duration) | |
| DC input impedance | 2kΩ ± 1% (GB12113Figure 4) | |
| Input impedance | ≤100kHz 5%; >100kHz 10% | |
| Frequency response | Accuracy: same as current measurement error | |
| PA TEST (POWER PARAMETER MEASUREMENT) | ||
| Alarm | Power upper/lower limit alarm; | |
| Settings of power upper/lower
limit |
Range: 0.00W~6000W. Resolution: 0.01W /0.1W /1W,
Error: ± (0.1%× setting +0.1%× range) |
|
| Active power measurement | Range: 0.10W~6.000kW. Resolution: 0.01W /0.01W /0.1W /0.001kW
Accuracy: >PF 0.5: ± (0.1%× reading +0.1%× range) PF≤0.5: ± (0.4%× reading +0.1%× range) |
|
| Voltage measurement | Range: 5.00V~300.0V, peak factor: ≤1.6. Resolution: 0.01V /0.1V;
Accuracy: ± (0.1%×reading +0.1%× range), 45Hz≤f≤65Hz |
|
| Current measurement | Range: 0.00mA~25.00A , peak factor: ≤1.6. Resolution: 0.01mA /0.1mA /0.001A /0.01A
Accuracy: ± (0.1%× reading +0.1%× range), 45Hz≤f≤65Hz |
|
| Power factor measurement | Range: ± (0.100~1.000). Resolution: 0.001
Accuracy: ±0.01 (voltage/current amplitudes are greater than 10% of the corresponding ranges) |
|
| Frequency measurement | Range: 45.00Hz ~65.00Hz. Resolution: 0.01Hz. Accuracy: ± (0.1%× reading ) | |
| Duration | Range: 0, (0.5~999.9) s, 0: infinite. Resolution: 0.1s. Accuracy:± 0. 1%× setting + 2 word) | |
| ST TEST (LOW VOLTAGE START TEST) | ||
| Settings of current upper/lower
limit |
Range: (0.00~25 .00) A. Resolution: 0.01A. Error: ± (0.1%× setting +0.1%× | |
| Voltage measurement | Range: 5.00V~300.0V,peak factor: ≤1.6. Resolution: 0.01V /0.1V;
Accuracy: ± (0.1%× reading +0.1%× range), 45Hz≤f≤65Hz |
|
| Current measurement | Range: (0.02~25 .00) A, peak factor: ≤1.6. Resolution: 0.01A
Accuracy: ± (0.1%× reading +0.1%× range), 45Hz≤f≤65Hz |
|
| Duration | Range: 0,(0.5~999.9) s, 0: infinite. Resolution: 0.1s. ± 0. 1%× setting + 2 word) | |
| FUNCTIONAL INTERFACE | ||
| Remote controller interface | Standard, optional foot switch (start up) | |
| Alarm lamp connector | Standard, optional three-color alarm lamp ( test, pass, alarm) | |
| Communication port | Standard, network port, RS232,RS485, GPIB
one of four options, default RS232 |
|
| Barcode interface | Standard, RS232 interface, barcode automatic recognition and programming match | |
| U disk storage connector | Standard, support standard U disk connector, test data automatic storage | |
| Switching value interface | Standard, can output the switching value of startup, stop, test, pass and alarm | |
| Printer connector | Standard, support needle printer an d micro-printer | |
| Rear panel test output interface | Standard, rear panel output interface of high-voltage and grounding tests | |
| GENERAL SPECIFICATIONS | ||
| Verification and calibration environment | 23℃±5℃，（45～75）%RH，little dust | |
| Operating environment | 0 ºC ～40ºC,，（20～90）%RH，little dust | |
| Storage environment | -10℃～50℃，（5～95）%RH，24h | |
| Input Power | AC 220V±10%, 50Hz±5%, 10A | |
| Power consumption of system | Max 550W | |
| Weight | About 45kg | |
| Dimension (mm, without external package) | 483(W)x178(D)x 550(H) | |
Reviews
There are no reviews yet.