MTJ-5530T, battery performance comprehensive tester, can test radio batteries, cell phone batteries etc. within 60V30A. It can test multiple lithium-ion batteries, Ni-MH batteries and polymer batteries (groups), such as: MP3/4 batteries, digital batteries, dual-wire battery packs, Cell phone batteries, etc.; This tester is suitable for cordless batteries, cell phone batteries, digital batteries, etc. widely used in battery manufacturers; It can meet the production tests of high, medium and low quality batteries by various manufacturers. It takes less than 1 second to test a battery; it is fast, full-featured and high-precision; It is the most accurate tester currently available on the market.
The MTJ-5530T can make quantitative and accurate measurement of some basic parameters of the battery, and measure the open circuit voltage, internal resistance, charge and discharge of the battery. Performance and battery capacity are specifically for lithium batteries. It also has overcharge protection, over-discharge protection, over-current protection, short-circuit protection and other functions, and the corresponding values have been measured, which greatly facilitates battery production and pre-sales and after-sales service. In a few simple steps, you can intuitively evaluate the performance and quality of the battery. It also has a quick scan function. You can set the upper and lower limits of the measurement parameters and quickly detect defects in a batch of dead battery products. Increases production efficiency.
TECHNICAL PARAMETERS
Model | MTJ-5530T | ||
Measuring range | Voltage Measuring Range | 0-60V 1mV Accuracy: ±5mV | |
Internal Resistance Measuring Range | 0-1999mΩ Resolution 1mΩ | ||
Capacity Measuring Range | 0-99999mAH Minimum Resolution 1mAH | ||
R1 R2 Resistance | 1kΩ ~ 200kΩ | ||
Measuring accuracy | Voltage Measuring Accuracy | ±(Result*0.1%+3mV) (Voltage 0~36V) | |
±(Result*0.1%+30mV)(Voltage 37~60V) | |||
Current Measuring Accuracy | ±(Result*0.2%+30mA)(Current 0~10A) | ||
±(Result*0.5%+30mA)(Current 11~30A) | |||
Internal Resistance Measuring Accuracy | ±(Result*1%+1mΩ) | ||
Capacity Measuring Accuracy | ±2% | ||
Test Speed | Static Test (All Functions) | 1.1-2 s | |
Internal CNC | Maximum Output Voltage (constant voltage + constant current) | 30V | |
Voltage source index | Output Maximum Current | 1A (0.1mA ~ 3.0000A) | |
Output Maximum Power | 30W | ||
Ripple Voltage | ﹤20mV | ||
Load Regulation | ﹤10% | ||
Boost Response Time | 1S | ||
Internal CNC Electronic load index | Maximum Discharge Voltage | 60V | |
Maximum Discharge Current | 3A Continuous (0.1mA ~ 3.0000A) | ||
Limit Power | 100W(continuous) | ||
Load Model | Constant Voltage Constant Current | ||
Communication | Yes (with host computer software) | ||
Accessory | Test fixture for resistance, Test fixture for voltage, Temperature probe, Power cable, Data line | ||
Size and Weight | Shelf size(mm):215(W)*88(H)*375(D) Dimensions(mm):235(W)*105(H)*430(D) About 3.6kg |