Technical Parameters:
| Parameter/Model | MT-I17E: Test Probe 43 |
| Bar thickness | 5 ± 0.05 |
| Bar width | 5 ± 0.15 |
| Bar length | 80 ± 0.2 |
Test Probe 43
Test Probe 43 meets the standard of EN/IEC 61032, Clause 6.2.4.b, Figure 17. It is intended to verify the protection of fixed and portable visibly glowing radiant heaters.
Description
Related products
Small Test Pin Probe
Small Test Pin Probe meet the standards BS1363-1 Clause 12.6.1 Figure 1 and IEC 60065 Annex B. It is used to test for the electronic equipment to see whether the hidden dangerous parts of the terminal device of can be touched.
Triangle Probe for Heating Element
Triangle Probe for Heating Element meets the standard of UL 1278 Figure 10.3.
Test Probe for Uninsulated Live Parts
Test Probe for Uninsulated Live Parts meets the standards of UL 507:2006 (pa135a) Figure 9. 1, UL 749 Figure 1, UL 982 Figure 58. 6 and UL 1278 Figure 8. 1 (pa130a).
Cylindrical Rod With Hemispherical End For
Cylindrical Rod With Hemispherical End For meets the standard of IEC 60335-2-14 Clause 20.103. This rod is designed to test accidental operation of the switches used in the hand-held blenders in order to prevent accidental operation, in which the actuating member is positioned in a recess or otherwise guarded.
Generator A Cone
Generator A Cone is designed according to TS EN ISO 8528 Figure 1 to be used in generator tests.
Blade Shaped Probe
Blade Shaped Probe meets the standard of UL 749 Figure 3(SB0504A). This probe is designed for household dishwasher protective testing.
Scratching Tool Tip
Scratching Tool Tip meets the standard of EN/IEC 60335-2-24, Clause 21.107.2, Figure 102.
Test Probe for Fixed Fans
Test Probe for Fixed Fans meets the standard of UL 507 Figure 8. 2 (S2140a). It is used for fan propellers and other moving parts of stationary fans and fans intended to be permanently connected to fixed wiring.
Reviews
There are no reviews yet.