Technical Parameters:
| Parameter / Model | MT-I10E Test probe 14 |
| Bar diameter | 3+0.03 0 |
| Bar tip diameter | 1+0.015 0 |
| Bar length | 80 ± 0.5 |
| Rod tip radius | R 0.2 ± 0.05 |
Description
Related products
Conical Tipped Steel Pin
Conical Tipped Steel Pin is a component of the solid insulation scratch test apparatus specified in EN / IEC 60335-1, Clause 21.2.
Rod Probe for Heating Element
Rod Probe for Heating Element meets the standard of UL 1278 Figure 10.4
Test Probe 41
Test Probe 41 meets the standard of EN/IEC 61032 Clause 6.2.4.a, Figure 16. It is intended to verify the protection against Access to glowing heating elements. Relevant standards: EN/IEC 60335-1, Clause 8.1.3;
Distance Gauges
Distance Gauges is intended for use in measuring ceepage and clearence distances.
Test Finger Nail
Test Finger Nail device meets the standard of EN/IEC 60335-1 Clause 22.11 Figure 7.
Telecom Test Prob
Telecom Test Prob complies with TS EN 60950-1 Figure 2C and UL 6500 Figure B.1 standards. It is used for bare parts of TNV circuits of equipment used in information technologies to determine whether they have sufficient protection.
Cylindrical Rod With Hemispherical End For
Cylindrical Rod With Hemispherical End For meets the standard of IEC 60335-2-14 Clause 20.103. This rod is designed to test accidental operation of the switches used in the hand-held blenders in order to prevent accidental operation, in which the actuating member is positioned in a recess or otherwise guarded.
Blender Probe
Blender Probe meets the standard of IEC 60335-2-14 Clause 20.102. The probe is designed to test whether the hand-held blenders are fully protected from the top of the blades and that the blades contact a flat surface while rotating.
Reviews
There are no reviews yet.