Test Probe 1 meets the standard of EN/IEC 61032, Clause 6.3.1.a, Figure 5.
It is intended to verify the degree of protection of enclosures against
ingress of solid foreign objects having a diameter of 50 mm or greater.
Test Probe 1
Test Probe 1 meets the standard of EN/IEC 61032, Clause 6.3.1.a, Figure 5. It is intended to verify the degree of protection of enclosures against ingress of solid foreign objects having a diameter of 50 mm or greater.
Related products
Small Test Pin Probe
Small Test Pin Probe meet the standards BS1363-1 Clause 12.6.1 Figure 1 and IEC 60065 Annex B. It is used to test for the electronic equipment to see whether the hidden dangerous parts of the terminal device of can be touched.
Cone Probe for Heating Element
Cone Probe for Heating Element meets the standard of UL 1278 Figure 10.1.
Distance Gauges
Distance Gauges is intended for use in measuring ceepage and clearence distances.
Blender Probe
Blender Probe meets the standard of IEC 60335-2-14 Clause 20.102. The probe is designed to test whether the hand-held blenders are fully protected from the top of the blades and that the blades contact a flat surface while rotating.
Test Probe for Uninsulated Live Parts
Test Probe for Uninsulated Live Parts meets the standards of UL 507:2006 (pa135a) Figure 9. 1, UL 749 Figure 1, UL 982 Figure 58. 6 and UL 1278 Figure 8. 1 (pa130a).
Test Probe For Fans
Test Probe For Fans meets the standard of UL 1310 Figure 16.4. It is designed to test the accessibility of the movable blades of fans.
Test Probe for Fixed Fans
Test Probe for Fixed Fans meets the standard of UL 507 Figure 8. 2 (S2140a). It is used for fan propellers and other moving parts of stationary fans and fans intended to be permanently connected to fixed wiring.
Rod Probe for Heating Element
Rod Probe for Heating Element meets the standard of UL 1278 Figure 10.4
Reviews
There are no reviews yet.