Features:
Diameter = 80 mm
Length = 100 mm
SR = 0.5
Generator B Cone
Generator B Cone meets the standard of EN ISO 8528 Figure 2. It designed for generator tests
Related products
Distance Gauges
Distance Gauges is intended for use in measuring ceepage and clearence distances.
Test Probe 43
Test Probe 43 meets the standard of EN/IEC 61032, Clause 6.2.4.b, Figure 17. It is intended to verify the protection of fixed and portable visibly glowing radiant heaters.
Test Probe 41
Test Probe 41 meets the standard of EN/IEC 61032 Clause 6.2.4.a, Figure 16. It is intended to verify the protection against Access to glowing heating elements. Relevant standards: EN/IEC 60335-1, Clause 8.1.3;
Small Test Pin Probe
Small Test Pin Probe meet the standards BS1363-1 Clause 12.6.1 Figure 1 and IEC 60065 Annex B. It is used to test for the electronic equipment to see whether the hidden dangerous parts of the terminal device of can be touched.
Cylindrical Rod With Hemispherical End For
Cylindrical Rod With Hemispherical End For meets the standard of IEC 60335-2-14 Clause 20.103. This rod is designed to test accidental operation of the switches used in the hand-held blenders in order to prevent accidental operation, in which the actuating member is positioned in a recess or otherwise guarded.
Test Probe for Fixed Fans
Test Probe for Fixed Fans meets the standard of UL 507 Figure 8. 2 (S2140a). It is used for fan propellers and other moving parts of stationary fans and fans intended to be permanently connected to fixed wiring.
Telecom Test Prob
Telecom Test Prob complies with TS EN 60950-1 Figure 2C and UL 6500 Figure B.1 standards. It is used for bare parts of TNV circuits of equipment used in information technologies to determine whether they have sufficient protection.
Blender Test Probe
Blender Test Probe meets the standard of IEC 335-2-14 Clause 20.2. This probe is designed to test access to the moving parts of the Blenders.
Reviews
There are no reviews yet.