Technical Parameters:
- Material: hardened steel
- the end of which has the form of a cone with an angle of 40°.
- Its tip is rounded with a radius of 0,25 mm ± 0,02 mm.
Conical Tipped Steel Pin
Conical Tipped Steel Pin is a component of the solid insulation scratch test apparatus specified in EN / IEC 60335-1, Clause 21.2.
Description
Related products
Test Probe for Portable Fans
Test Probe for Portable Fans meets the standards of UL 507 Figure 8.1(pa160b) and UL 1278 Figure 9.1 (pa160). It is designed to test the accessibility of the movable blades of portable fans.
Young Adult Arm Test Probe
Young Adult Arm Test Probe meets the standards of EN 50636-2-100 Figure 1 and IEC 50636-2. It is used to simulate the young adult to test whether the hazardous parts can be touched.
Scratching Tool Tip
Scratching Tool Tip meets the standard of EN/IEC 60335-2-24, Clause 21.107.2, Figure 102.
Thrust Rod
Thrust Rod meets the standards of IEC60884-1:2002 and IEC60950-1: 2005.
Hazardous Live Parts Probe
Hazardous Live Parts Probe meets the standards EN/IEC 61010-1, EN/IEC 60065 clause 9.1.3, UL 3101-1 and CSA 1010-1.
Test Probe for Uninsulated Live Parts
Test Probe for Uninsulated Live Parts meets the standards of UL 507:2006 (pa135a) Figure 9. 1, UL 749 Figure 1, UL 982 Figure 58. 6 and UL 1278 Figure 8. 1 (pa130a).
Test Probe With Force
Test Probe With Force meet the standard IEC 60884-1 Clause 10.5, Figures 9 and 10. It is designed to test whether the live parts of the shuttered socket-outlets are accessible.
Small Test Pin Probe
Small Test Pin Probe meet the standards BS1363-1 Clause 12.6.1 Figure 1 and IEC 60065 Annex B. It is used to test for the electronic equipment to see whether the hidden dangerous parts of the terminal device of can be touched.
Reviews
There are no reviews yet.