Technical parameters:
– Length of probe: 127 mm
– Probe thickness: 0.81 mm
– Handle Material: Nylon
– Probe material: Stainless steel
Blade Shaped Probe
Blade Shaped Probe meets the standard of UL 749 Figure 3(SB0504A). This probe is designed for household dishwasher protective testing.
Related products
Test Probe for Uninsulated Live Parts
Test Probe for Uninsulated Live Parts meets the standards of UL 507:2006 (pa135a) Figure 9. 1, UL 749 Figure 1, UL 982 Figure 58. 6 and UL 1278 Figure 8. 1 (pa130a).
Test Probe 41
Test Probe 41 meets the standard of EN/IEC 61032 Clause 6.2.4.a, Figure 16. It is intended to verify the protection against Access to glowing heating elements. Relevant standards: EN/IEC 60335-1, Clause 8.1.3;
Test Probe for Fixed Fans
Test Probe for Fixed Fans meets the standard of UL 507 Figure 8. 2 (S2140a). It is used for fan propellers and other moving parts of stationary fans and fans intended to be permanently connected to fixed wiring.
Thrust Rod
Thrust Rod meets the standards of IEC60884-1:2002 and IEC60950-1: 2005.
Test Probe 43
Test Probe 43 meets the standard of EN/IEC 61032, Clause 6.2.4.b, Figure 17. It is intended to verify the protection of fixed and portable visibly glowing radiant heaters.
Conical Tipped Steel Pin
Conical Tipped Steel Pin is a component of the solid insulation scratch test apparatus specified in EN / IEC 60335-1, Clause 21.2.
Cylindrical Rod With Hemispherical End For
Cylindrical Rod With Hemispherical End For meets the standard of IEC 60335-2-14 Clause 20.103. This rod is designed to test accidental operation of the switches used in the hand-held blenders in order to prevent accidental operation, in which the actuating member is positioned in a recess or otherwise guarded.
Test Probe 32
Test Probe 32 meets the standard of EN/IEC 61032, Clause 6.2.3.b, Figure 15. It is intended to verify the protection provided by fan guards against Access to hazardous mechanical parts.
Reviews
There are no reviews yet.