|Rating of plug or portable socket-outlet||Flexible cable (number of cores × nominal cross-sectional area in mm2)|
|2 x 0.5||2 x 0.75||3 x 0.5||3 x 0.75||(2 or more) × 1 or greater|
|Up to and including 16 A and 250 V||0.10 Nm||0.15 Nm||0.15 Nm||0.25 Nm||0.25 Nm|
|16 A and above 250 V||—||—||—||—||0.35 Nm|
|Above 16 A||—||—||—||—||0.425 Nm|
Torque Tester For Cord Anchorages
Torque Tester For Cord Anchorages meets the standard of IEC 60884-1 Clause 23.2.
Immediately after the tensile test of the flexible cables, the cord anchorage is exposed to the following torque for 1 minute.
SKU: MT-FC1E Category: Plug Socket Switch Test Equipment
Apparatus for Testing Cord Retention meets the standard of IEC 60884-1, Clause 23.2, Figure 20. It is designed to test the effectiveness for cord anchorage of the accessories.
Gauges for Plugs and Socket Outlets are designed for size inspection of plugs and socket-outlets in accordance with IEC 60884-1 standard.( CEE7, EN 50075) Gauges for Plugs and Socket Outlets required for all plugs and sockets specified in IEC / TR 60083 are produced according to customer requirements.
Apparatus for Impact Test at Low Temperature meets the standard of IEC 60884-1 Clause 24.4 Figure 27 and Clause 30.4 Figure 42. It is used for low temperature mechanical impact test for plugs and portable socket-outlets with enclosures, covers or bodies of by made of elastomeric or thermoplastic material. In addition, this device is also used for low temperature impact test of pin-insulating sleeves.
Endurance Test Device For Appliance Switches is used to perform the endurance tests specified in clause 17 of EN/IEC 61058-1.
Pull Tester For Plug Pins meets the standard of IEC 60884-1 Clause 24.10 Figure 30. It is used to verify the fixation of pins in the body of the plug.
Temperature Rise Measuring Device has been designed as a current source up to 1000 amps so that it can measure temperature from 8 different points to be used in the temperature rise tests of the standard of IEC 60884-1 Clause 19.
Gauges for Appliance Couplers meet EN/IEC 60320-3:2015 Clause 6. These gauges are designed for size checks of Appliance Couplers according to EN / IEC 60320-1.
Electrical Test Load is designed and manufactured according to IEC 60884(Clauses 20 and 21), IEC 61058 (Clause 17), IEC 606691(Clauses 18 and 19) standards and etc. It is used for the on-off ability test and the normal operation lifespan test of the Switches for household and similar fixed-electrical installations. Besides, it is also applied in the test of breaking capacity of plug and socket-outlets, and mechanical action of normal operation lifespan.