Gauges for Plugs and Socket Outlets

Apparatus for Impact Test at Low Temperature meets the standard of IEC 60884-1 Clause 24.4 Figure 27 and Clause 30.4 Figure 42. It is used for low temperature mechanical impact test for plugs and portable socket-outlets with enclosures, covers or bodies of by made of elastomeric or thermoplastic material. In addition, this device is also used for low temperature impact test of pin-insulating sleeves.

Insulation Sleeves of Plug Pins Abrasion Test Apparatus meets the standard of IEC 60884-1 Clause 24.7, Figure 28. It is designed to perform a abrasion test on the insulating sleeves of plug pins.

Apparatus for Verification of Maximum Withdrawal Force meets the standard of IEC 60884-1 Clause 22, Figure 18 and Figure 19. This tester is used to check whether the minimum force used to pull the single pin out of the socket-outlet with the maximum force applied to pull the plug out of the socket-outlet is within the allowed range in the standard.

Torque Tester For Cord Anchorages meets the standard of IEC 60884-1 Clause 23.2. Immediately after the tensile test of the flexible cables, the cord anchorage is exposed to the following torque for 1 minute.