Peak Voltmeter | MT-PVE1141
Peak Voltmeter | MT-PVE1141; The peak value of voltage is one of the parameters that must be measured in many test cases. A general voltmeter can only measure the effective value (root mean square value) of voltage, and it is difficult to accurately measure the voltage peak value, especially when the voltage waveform is turbulent, the peak voltage value should be used.
DEVICE INTRODUCTION VIDEO
DEVICE SHORT VIDEO
Description
Peak Voltmeter | MT-PVE1141; The peak value of voltage is one of the parameters that must be measured in many test cases. A general voltmeter can only measure the effective value (root mean square value) of voltage, and it is difficult to accurately measure the voltage peak value, especially when the voltage waveform is turbulent, the peak voltage value should be used.
Related products
HV Phase Sequence Controller
HV Phase Sequence Controller; used for detection of high-voltage power grid closing point on both sides of the phase sequence is the same. Two power line connection before must check phase sequence, or line may be short circuit. The instrument suitable for 0.4 kV ~ 220 kV power transmission line, and can test whether line charged. The Instrument adopts the wireless transmission technology, safe and reliable operation, easy to use.
Tangent Delta Tester (Automatic) | MT-OTDT2
Tangent Delta Tester is applied to measure the dielectric loss and capacitor value of insulation materials in high voltage power equipment. The non-power frequency voltage source is integrated in the tester to avoid power frequency interference. That make the tester has a good performance in measurement precision.
