No Load Loss Tester | MTNL-30
During the test, the high voltage windings are left open circuit by applying the rated voltage to the low voltage terminals of the transformer. No Load Loss Tester | MTNL-30; It is applied to measure the iron losses that occur during idle (unloaded) operation of the transformer.
DEVICE INTRODUCTION VIDEO
DEVICE SHORT VIDEO
https://youtube.com/shorts/Mv-N5P79D7s?si=Ir7E1LU4zpGpy12z
SKU:
MTNL-30E
Category: Transformer Test Equipment
Tags: no load, no load loss, no load loss tester, transformer no load loss
Description
During the test, the high voltage windings are left open circuit by applying the rated voltage to the low voltage terminals of the transformer. No Load Loss Tester | MTNL-30; It is applied to measure the iron losses that occur during idle (unloaded) operation of the transformer.
Related products
Lightning Impulse Voltage Test System
Load and No-Load Tester For Transformers | MT-6300C
Load No-Load Tester | MTS-TLNoL-100
Load No-Load Tester | MTS-TLNoL-100 measures transformer load current, load loss, short circuit voltage, short circuit (load) losses. Harmonic test can be analyzed up to 31 harmonics. All relevant test results are automatically corrected. The instrument can automatically: waveform correction, temperature correction, non-rated voltage correction, calibration and other non-rated current correction for more accurate test results. You can store 500 sets of experimental results.
Multifunctional CE Tester
Multifunctional CE Tester is suitable for routine testing of IEC 60065, IEC 60335, IEC 60601, IEC 60745, IEC 60884, IEC 61010, IEC 61029, IEC 61558, IEC 60598-1etc.
It is designed to perform high voltage test, insulation resistance test, earth continuity test, leakage current test, low start and optionally power input test (with MT-6BATE model) in a single device.