MTJ-2516S series multi-channel resistance tester is a high-precision wide-range automatic DC resistance tester specially designed for multiple resistance testing. The instrument can measure 20 resistances at the same time and display them on the screen at the same time. The instrument has high anti-interference; each channel has an accuracy of 0.05% and a range of 10uΩ~200KΩ; the display digits are four and a half digits; the test speed can reach up to 20 times per second; the temperature compensation of the instrument avoid the influence of ambient temperature on the test work; the instrument has a very convenient sorting function, the Handler interface can output the sorting results of all channels without expansion, and can be equipped with RS232/USB/RS485 interfaces for remote control and data acquisition and analyze. The instrument is small, compact but fully functional. Through the four-terminal test method, high-speed, high-precision measurement of various high, medium and low value resistors; various switch contact resistance; relay wire package and contact resistance; transformer, inductor, motor, deflection coil winding resistance; Coil resistance, shunt resistance, series film resistance, wire resistance; metal riveting resistance of cars, ships, airplanes; DC resistance of fuses, resistors, conductive rubber, printed board lines and hole resistance. The instrument is widely used in most places such as research and development, production lines, and incoming inspection.
TECHNICAL PARAMETERS
| Model | MTJ-2516S |
| Test Parameter | 10 channel DC resistance, 20 channel DC resistance |
| Basic Accuracy | Resistance：0.5% Voltage：0.05% |
| Test Range | Resistance：0.01mΩ~200KΩ |
| Signal Source | AC 1kHz，Test current：<150mA |
| Range | Three-range automatic and manual |
| Test Speed | Fast 20 times/s, Middle 10 times/s, Slow 5 times/s |
| Display | Direct reading,ΔABS, Δ%,Sorting result |
| Max. Reading | resistance：200.00 |
| Correction | Short circuit clear in full range |
| Comparators | RHI/RNG/RLO Output VHI/VNG/VLO Output absolute value tolerance±TOL Sorting Percent tolerance TOL Sorting Order comparison sorting |
| Trigger | Internal trigger, manual trigger, external trigger and remote trigger |
| Interface | USB HOST/USB DEVICE/RS232/HANDLER/RS485 |
| Power supply | Voltage：195VAC～245VAC Frequency：50Hz Power：Max. 15VA |
| Size and Weight | Dimension（mm）：264 (W)x107(H)x350 (D) Weight：4kg |
| Accessories | Kelvin test line, RS232 interface cable |
| Optional accessories | Test probe, test meter stick |
| Others | Test line damage detection true color 4.3-inch TFT-LCD display, keyboard lock and data retention function and U disk data recording |
