Precision LCR Meter is high precision components parameter analyser designed using automatic balance bridge principle. 20 Hz ~ 2 MHz test bandwidth, 1µHz step, continuous random frequency settings, 0.01 m Ω ~ 100 mΩ impedance measurement range, 0.05% of the basic measurement precision and the automatic level control functions provided by equipment, lists scan/graphics scan and file sorting counting functions provide accurate and complete the survey and analysis for the vast majority of components and materials. Widely used in product research development, online testing, components incoming inspection and so on applications.
- Frequency measurement range 20 Hz ~ 2 MHZ frequency continuous, arbitrary setting, frequency resolution is 10 mu Hz.
high resolution and high accuracy
Six display resolution, the basic measurement accuracy up to + / – 0.05%
- 15 kinds of impedance parameters, 23 kinds of parameter combination Measurable capacitance (Cs/Cp), inductor (Ls/Lp) and resistance (Rs/Rp), dielectric loss (D), the quality factor (Q) impedance (| Z |), admittance (| | Y), the phase Angle (theta), conductance (Gp) and reactance (Xs), susceptance (Bp), the dc resistance * (Rdc, only CS7600X series can be measured ) each measurement shows two parameters at the same time.
Note: the subscript S – series model, the subscript P – in parallel mode
- Separation (BIN) measurement
Options setting 10 sets sorting items, use the measured results filter the components to be tested
- Load compensation function
With a reference sample compensate measure value. This function can guarantee the consistency of more instruments measuring .
- Automatic level control function
In addition to the usual open circuit incentiving signal setting . In constant voltage/constant current mode, evaluate voltage/current characteristic of components. Signal level set range: 5 mVrms ~ 2 Vrms / 50 µA ~ 20 mA
- Analysis function List scanning test and graphics scan test
Provide 10 groups list scanning combination and 240 points/linear logarithmic graphics scan function; Can respectively set voltage, current, frequency offset voltage, offset current as a condition of scanning, evaluating the performance characteristics of components under various measuring conditions
|Test frequency||MT7620/MT7620X: 20Hz~2MHz|
|AC test level||5mVrms~2Vrms (Gerilim modu); 1mV adım|
|50 µArms~20mArms(Akım modu);10µ A adım|
|Int. DC bias level||0~2V (Gerilim mode); 10mV adım|
|0~20mA (Akım mode);100uA adım|
|Measurement Parameters||IZU IYU 0 \ Csx CpN Lsn Lpx RsN Rpx Xx
G> Bn Dx Ωx Rdc (Only MT7600X series measurable)
|Measuring display range||IZU R, X, Rdc||0.01 m Ω -99.9999M Ω|
|IYL Gx B||0.01 nS~99.9999S|
|A x %||-999.999%~999.999%|
|Accuracy||Z: ±0.05% 9 : ±0.0005|
|List sweep||Azami 10 nokta|
|Graphic sweep||Azami 240 nokta|
|Süpürme mode: lineer/ logaritmik|
|Measuring Range||1 /10/30/100/300/1 k/3k/10k/30k/100k/300k/1 M/10M|