MTJ-2826 high precision digital bridge is a kind of multifunctional component parameter tester for testing various electronic components. Using 7 inch 800×480 color TFT LCD display. High speed, stable. 20Hz-5MHz multi frequency points and 0.05% accuracy can meet the requirements of production line quality control, incoming inspection and laboratory measurements.
TECHNICAL PARAMETERS
| Model | MTJ-2826 | |
| Test Frequency | 20 Hz－5MHz，0.01Hz Resolving power | |
| Test Parameters | | Z|, |Y|, C, L, X, B, R, G, D, Q, θ,DCR | |
| Basic Measurement Accuracy | 0.05% | |
| Equivalent Circuit | Series connection, parallel connection | |
| Math Function | Absolute deviation, Percentage deviation | |
| Range Mode | Automatic, keep, manual selection | |
| Trigger Mode | Inside ,manual, outside, bus | |
| Test speed（≥1kHz） | High speed: 75 times/sec, Medium speed: 12 times/sec, Slow speed: 3 times/sec | |
| Average Number | 1—255 | |
| Delay Time | 0—60s, steeping by 1ms | |
| Calibration Function | Open circuit/ short circuit/ load | |
| List Scan | 10 point list scan function | |
| Display mode | Direct reading ，Δ，Δ%，V/I（Voltage / current monitor） | |
| Monitor | 800×480 RGB7 inch 16: 9 TFT LCD display | |
| Test signal | ||
| Output Impedance | 30 Ω, 50 Ω,100 Ω, 10 /CC optional | |
| Test Signal Level | normal：5 mV－2 V accuracy ：10%，stepping by 1 mV | |
| constant level：10 mV－1 V ,accuracy：5%，stepping by 1 mV | ||
| DC bias source | Inside | 0V，1.5V，2V，accuracy：1% |
| Matching | ±5V（±100mA）DC bias source matching | |
| 1A：0-1A The DC bias source. | ||
| Display range | ||
| |Z|, R, X | 0.01mΩ —99.9999 MΩ | |
| DCR | 0.001 mΩ —99.9999 MΩ | |
| |Y|, G, B | 0.00001µS —99.9999S | |
| C | 0.00001pF —9.9999F | |
| L | 0.00001µH —9999.99H | |
| D | 0.00001 —9.9999 | |
| Q | 0.00001 —9999.9 | |
| θ(DEG) | -179.999º —179.999º | |
| θ(RAD) | -3.14159 —3.14159 | |
| Others | ||
| Comparator Function | Ten files: (nine files qualified, a file failed), and another AUX file | |
| Multi Parameter | Can choose any of the four parameters at the same time measurement & display | |
| Curve Scan Function | A variety of test conditions, the image of the specimen to be scanned | |
| Storage | Internal storage, USB extended storage | |
| Interface | Standard configuration RS232C,HANDLER,USB HOST,USB DEVICE,Earphone interface,foot switch interface;optional GPIB、LAN | |
| Size and N/W | 375mm(width）*135mm（height）*350mm(length), About 7kg |
|
