The battery short-circuit test adopts the principle of fast switching power supply, and the charging and discharging speed of the tested product is fast.
- Capacitive load realizes fast charging and
- The test is stable and no need additional shielding
- Connection detection function of measured parts to prevent open-circuit
- Short circuit detection before test to prevent high voltage
- Continuous test mode, PASS termination mode, FAIL termination mode and forced termination
- Rich interface, suitable for production line.
TECHNICAL PARAMETRELER
| Test Parameters | Insulation Resistance |
| Test Range | 0Ω to 4000MΩ （5 ranges） |
| Basic Accuracy | ±2% rdg. ±5dgt. ±2 % rdg. ±5dgt. 25 V≦V < 100 V [0～20MΩ], 100 V≦V < 500 V [0～20MΩ], 500 V≦V≦1000 V [0～200MΩ] |
| Test Voltage | 25~1000V DC 1.8mA |
| Testing Speed | 50ms(fast )/500ms(slow) |
| Connection Exception Display | High Voltage End Open Circuit “ContHi”, Low Voltage End Open Circuit“ContLo”, Output end all Open Circuit “ContHL” |
| Short Circuit Anomaly Display | “SHORT” |
| Out-of-Range Display | Range under “UNDER.F”, range over”OVER.F” |
| Discharge Current | 10mA Constant current discharge |
| Comparator | PASS/L.FAIL/U.FAIL |
| Setting up Data Save | Recordable 10 sets of data panel settings |
| Trigger | IO Trigger, Manual Trigger, Bus Trigger |
| IO Interface Type | Configurable as PNP or NPN |
| Interface | External IO Interface/Analog Output Interface/LAN Interface/Rs232 Interface Buzzing sound,PASS/U.FAIL/L.FAIL LED light,UL_FAIL,U.FAIL/L.FAIL Lighting at the same time，EXT. I/O output、Obtaining the Decision Result by RS-232C |
| Power Supply | Voltage:100V ~ 240V AC, Frequency:50Hz/60Hz |
| Size and Weight | Size (w* h * d):235mm x 105mm x360mm, Weight:5kg |
