Torque Tester for Hanging Luminaires meets the standard of TS EN 60598-1 clause 4.14.1. It is used to check whether the suspension of hanging lamps has sufficient safety factor.
FEATURES
Aluminum profile is used in the frame; The appearance is simple in beautiful structure.
A torque motor for torque control is used to control the torque.
The height of the cross member can be adjusted manually (the height and center position of the lamp) according to the different types of suspended lamp types.
The lamp torsion angle is displayed digitally.
If the force required to reverse the connection is outside the predetermined range, the unit automatically alarms and stops the test.
Main technical parameters: Torque: 0.5 Nm – 3 Nm; Angle Display: 0 – 360 degrees; Time setting: 1 min.
Torque Tester for Hanging Luminaires Technical Parameters:
- PLC touch screen control
- Test Torque: 2.5 Nm
- Test time: 1 min
- Movement direction: Clockwise and anticlockwise direction.
- Test evaluation: For this test, it shall not be possible to rotate the luminaire relative to the fixed part by more than one revolution in either direction.
Reviews
There are no reviews yet.