Lift Cable Flexibility Tester

The Resistance Bridge is required for connecting the cable sample and making the resistance measurement for cable resistance measurements according to the TS EN 60245-1 standard.

Laser Diameter Gauge | Dual Axis Measurement cable, wire, hose, pipe, strip, glass etc. from the extrusion machine in the production line. It is designed for double measurement of diameter measurement of transparent or non-transparent materials. It can control the working speed of the extrusion machines so that the products coming out of the production line are of the desired diameter.

Microcomputer Tensile Testing Machine applicable for the electric wire, metal, non-metal, rubber and building materials to do the test of stretch, extension, stripping, displacement and tearing. It conforms the standard requirements such as IEC 60811-1-4, IEC 60245 and IEC 60227.

Spark Tester complies with the standard requirement of UL1581-1990. It is indispensable test equipment for testing the quality of insulating layer with high voltage during the productive process of electric wire and cable. By placing the cable on the production line, it ensures that the deterioration, holes and errors that may occur in the cable insulation during production are detected quickly and with high precision. With the spark tester, it can produce sine voltage waves up to 15kV at the mains frequency (50/60 Hz) and can be applied to cable insulation through bead electrodes along the 60 cm channel. Testing up to 200 meters per minute can be applied to the cable.

DEVICE INTRODUCTION VIDEO