LCR Meter | MTJ-2830 MTJ-2831 MTJ-2832
LCR Meter | MTJ-2830 MTJ-2831 MTJ-2832; It is designed to perform precise measurements of Inductance (L), Capacitance (C) and Resistance (R).
Description
LCR Meter | MTJ-2830 MTJ-2831 MTJ-2832; is a new generation of low cost, high-performance and compact LCR digital bridge. Using the latest technology and high density circuit design, it concentrates the essence of the large LCR tester, compact and compact. Abolish the traditional mechanical power switch and use software to control the power switch. 0.05% basic accuracy and good test stability can be comparable to high-end models. Equipped with 4.3 inch LCD display and new upgraded interface system. Beautiful and easy to operate. The instrument provides a rich interface and is compatible with the standard SCPI instruction. It can easily form various testing systems to meet the needs of inspection, production and scientific research.
TECHNICAL PARAMETERS
| Model | MTJ-2830 | MTJ-2831 | MTJ-2832 | ||
| Display | 4.3 TFT LCD display 480*272 | ||||
| Basic Measurement Readiness | LCRZ | 0.05% | 0.05% | 0.05% | |
| DCR | 0.10% | ||||
| Calibration Conditions | Preheat time≥ 30 minutes Environment temperature : 23±5℃ Signal voltage: 1Vvrms Cleared: after OPEN, SHORT Measuring cable length: 0m | ||||
| Test Signal Frequency | 50Hz-100kHz ,0.01Hz step,34points | 50Hz-200kHz, 37 points | 20Hz-200kHz, 0.01Hz step,15025 points | ||
| Signal Impedance Source Output | 30Ω,100Ω optional,±1%@1kHz | ||||
| AC Test Signal Level | Normal | 10mV-2Vrms Min. resolution: 10mV, accuracy: 10% x set voltage + 2mV 100μA-20mArms minimum resolution:0.1mA | |||
| Constant Level | 20mV-1Vrms Min. resolution:10mV 200μA-10mArms Min. resolution:0.1mA | ||||
| DCR Test Signal Level | 1V DC | 1V DC | 50mV-2V DC Min. Resolution: 0.5mV | ||
| DC Bias Voltage Source | — | 0V~±5V (Min. Resolution:0.5mV Accuracy:1%) 0mA~±50mA (Min.Resolution:0.5μA) | |||
| LCR Meter Test Parameters | L,C,R,|Z|,D,Q,|Y|,G,X, θd, θr, RDC, Vm, Im, △% | ||||
| Transformer Test Parameters | No | ||||
| DCR Display Range | 0.00001Ω~999.999MΩ | ||||
| LCR Parameter Display Range | |Z|,R,X 0.00001Ω~99.9999MΩ |Y|,G,B 0.00001μs~99.9999s C 0.00001pF-9.99999F L 0.00001μH-99.9999kH △% -999.999%~999.999% | D 0.00001-9.99999 Q 0.00001-99999.9 Θ(DEG) -179.999~179.999 Θ(RAD) -3.14159~3.14159 | |||
| Display Number of Digits | 6 | 5 | 6 | ||
| Measurement Speed (ms/times) | High:12.5ms, medium:83ms, slow:(167ms) | ||||
| Equivalent Circuit | Series connection, parallel connection | ||||
| Range Mode | Auto, keep | ||||
| Trigger Mode | Internal, manual, external, bus | ||||
| Average Number of Times | 1-255 | ||||
| Clear Function | Open circuit, short circuit, load | ||||
| Mathematical Operation | Direct reading, △ABS, △% | ||||
| Trigger Delay Setting | 0–60.000s, 1ms step | ||||
| Step Delay Setting | 0–60.000s, 1ms step | ||||
| List Scan | 201 point, Scanning parameters:Test frequency, AC voltage,AC current,DC BIAS voltage,DC BIAS current | ||||
| Unique Function | L-RDC Simultaneous testing, soft power switch, One-click screenshot function, data recording function | ||||
| Comparator Function | 10 gear sorting ,BIN1∽BIN9,NG,AUX | ||||
| gear counting function | |||||
| PASS,FALL Front panel LED display | |||||
| Internal Non-Volatile Memory | 100 sets of LCRZ instrument set file ,201 test results | ||||
| External USB Memory | Instrument settings files, CSV data files, screenshots (GIF images) | ||||
| Interface | HANDLER(control interface),USB HOST,RS232C,RS485(optional), GPIB(optional) | ||||
| Size / Weight | Upper frame size：215mm（W）*88mm（H）*335mm（D） Shape size：235mm（W）*105mm（H）*360mm（D) Weight ：3.9kg | ||||
Related products
Glow Wire Test Apparatus | MTC-GWE100
Glow Wire Test Apparatus | MTC-GWE100, "Glow wire test method" and other standard design and manufacturing requirements in IEC60695-2-10 ~ 13 , IEC60335-1 , IEC60884-1 , IEC60598-1 , IEC60950 , UL746A, electrical and electronic products, electrical appliances and fire hazard test materials, the simulation heat element or the heat caused by the heat or the overload resistance of the ignition source.
DEVICE INTRODUCTION VIDEO
DEVICE SHORT VIDEO
Load No-Load Tester | MTS-TLNoL-100
Load No-Load Tester | MTS-TLNoL-100 measures transformer load current, load loss, short circuit voltage, short circuit (load) losses. Harmonic test can be analyzed up to 31 harmonics. All relevant test results are automatically corrected. The instrument can automatically: waveform correction, temperature correction, non-rated voltage correction, calibration and other non-rated current correction for more accurate test results. You can store 500 sets of experimental results.
Power Analyzer | MT9800N
Power Analyzer | MT9800N; has the function of preset alarm, latches and communication, with a wide measurement range, rich in content, which can measure voltage, current, power, power factor, frequency, electrical energy and other parameters.MT9800N, It has all the measurement and display function, increase the data protection function and display function of these two parameters of frequency and power (energy).
DEVICE INTRODUCTION VIDEO
Dual Channel Transformer DC Resistance Tester | MTS-DWR-20A
Dual Channel Transformer DC Resistance Tester | MTS-DWR-20A; It is controlled by a single-chip microcomputer, which automatically completes self-testing, data processing, display and other functions, and has automatic discharge and discharge indication functions. The instrument has high test accuracy and easy operation, and can realize rapid measurement of transformer direct resistance.
