IPX5 and IPX6 Hand Held Jet Nozzle meets the standard of EN/IEC 60529 Clauses 14.2.5 and 14.2.6, Figure 6.
It is used in resistance tests against harmful water ingress of electrical devices.
Relevant standards: IEC60884-1, IEC60335-1, IEC60598-1, etc.
With pressure gauge, it can be used by replacing the nozzle, it also can match the complete set of waterproof system.
IPX5 and IPX6 Hand Held Jet Nozzle Technical Parameters:
| IP Code | IPX5 | IPX6 |
| Water supply | Water flow rate ＞ 12.5L/min±5% clean water without inclusion. It can be achieved by the stainless steel water tank and pressurized equipment |
Water flow rate ＞100L/min±5% clean water without inclusion. It can be achieved by the stainless steel water tank and pressurized equipment |
| The nozzle diameter | Ф 6.3 mm | Ф 12.5 mm |
| Water flow | 12.5±0.625L/min, Flow meter is adjustable | 100±5 L/min, Flow meter is adjustable |
| The distance from jet nozzle to enclosure | 2.5 ~ 3 m | 2.5 ~ 3 m |
| Testing time | Not less than 1min/m²(not less than 3 minutes) | |
| Pressure gauge | 0 ~ 0.25 MPa | 0 ~ 0.25 MPa |
| Site requirements | Dedicated IP waterproof test room whose width is more than 3m, With good function of inflow and drainage. Wall installation | |
