MTBR-500K, (with swivel tube and right angle tube) is used to test electrical and electronic equipment by simulating natural precipitation by spraying water from water holes on swivel tube or straight tube. It predicts and recognizes whether the cover or seals of this device will maintain a good working condition during and after testing.
MTBR-500K; It is widely used in electrical, electronics, automobile, motorcycle, electrical appliances, electromechanical equipment, instruments and meters and other industries.
TECHNICAL PARAMETERS
| Workroom dimensions (cm) | 80*80*80 |
| Exterior dimensions (cm) | 102*136*156 |
| Power | 2.0(KW) |
| Water spray ring radius | 375 mm |
| Water pipe diameter | φ16mm |
| Spraying hole diameter | φ0.4mm |
| Aperture spacing | 50 mm |
| Swing range | ±45°, ±60°, ±90°, ±180° |
| Test bench rotation speed | 1r/min, or steeples speed regulating (optional) |
| Swing speed | adjustable |
| Raining pressure | 80KPa, adjustable. (Meet 5±2 mm/min of rain density, according to standard calculation) |
| Rotate speed of holder | 1 ～ 3r/min, adjustable. (changeable following special requirement). Can make an angle of 45° |
| Area of holder | Ø600mm |
| Power supply | AC 380V±10%； 50 Hz |
| Ambient temperature & humidity | +5℃～32℃ ≤85%RH |
| Remark: The water for raining should be filtered soft water or purified water, to prevent the raining holes from blocked. | |
Reviews
There are no reviews yet.