Horizontal and Vertical Burning Tester is used for horizontal and vertical burning test of plastic material components. IEC60950-1, UL94, IEC60707, IEC60695-2-2, ISO1210, ISO 13387-1 etc. It is designed and made according to the relevant requirements of the standards. Tests electrical equipment and tools, extent of damage, linear burn rate, and residual flame. The baffle enclosure uses a spray-iron plate with a transparent observation window and a digital display meter. It has the advantages of convenient operation and reliable performance. It is suitable for plastic material components, engineering plastics and rubber materials of household appliances, lighting devices and electrical products.
There are two types of this equipment. One is button type, the other is touch screen type. The second type is equipped with 7 inch PLC touch screen, special software to control and remote control.
TECHNICAL PARAMETER
| Head of Burner | İnside Diameter: 9,5 mm±0,5 mm length is approximate 100mm±10mm upward from the air entrance |
| Angle of the Burner | 0~45°(manual adjusment) |
| Ignition Ground Plate | Standard Medical Cotton |
| Gas Supply | 98% standard methane gas or 37MJ/m3±1MJ/m3 natural gas or propane (provided by yourself) |
| Flame Temperature Gradient of Gas | 100℃±5℃~700℃±3℃, test süresi: 44s±2.0s veya 54s±2.0s veya özelleştirilmiş (sıcaklık kalibrasyon cihazı ile doğrulanmalıdır) |
| Temperature Calibration and Verification Device | controlled by imported instruments automatically, equipped with Φ5.5mm, 1.76±0.01g or Φ9mm, 10.00±0.05g copper head (optional) |
| Testing Time and Burning Time | 1~999.9s (Digital display, can be preset) |
| Repetion Burning Times | 1~9999 kez (Digital display, can be preset) |
| Adopts automatic igniton device, so the test can be done automatically. | |
| Internal Volume of Chamber | 0.75m3(1m3 de can also be choosen) |
| Dimension | 1330*730*1500mm |
| Input Power | AC 220V 50HZ 5A |
