High Voltage Tester | MT72BX
High Voltage Tester | MT72BX; is designed to perform high voltage testing of electrical devices in accordance with IEC 60065, IEC 60335, IEC 60601, IEC 60745, IEC 60884, IEC 61010, IEC 61029 and IEC 61558.
Description
High Voltage Tester | MT72BX;
Features:
This device meets the requirements of many electrical safety standards with a powerful transformer up to 1000VA.
Suitable for type tests and routine tests.
MT7XX series
- High voltage, low current, accurate measurement
- Optional adjustment of leakage current and test time, strong adaptation
- Display of real time, voltage and current values tested
- Audible and visual alarm
- Possibility to test with manual and remote control.
- High voltage breakdown protection
- The leakage current and high voltage test of the capacitor, the high voltage silicon stack and the reverse leakage current test of the transistor can be performed with this device.
MT5X series
- New design; Detecting whether the anti-electric wall and protective earth terminal are open
- The Threshold current value is set to the alarm to prevent incorrect evaluation when the external circuit is open.
- ARC detection
- PLC interface is standard, RS232 / 485 is optional and can be connected easily with automatic test system and realize quality statistics
- All measured parameters can be displayed in real time.
- Data is automatically saved without data loss while closing.
Technical Parameters:
| Model | Output Voltage (kV) | Trans former (mA) | Test Time | Accuracy | Trans former Power |
| MT 70 AX | 0~5 (AC) | 0~20 (AC) | (0.0 ~ 999) s | ± (5%+3) | 100VA |
| MT 71 AX | 0~10 (AC / DC) | 0~20 /10 (AC / DC) | (0.0 ~ 999) s | ± (5%+3) | 200VA |
| MT 71 BX | 0~10 (AC / DC) | 0~50 /20 (AC / DC) | (0.0 ~ 999) s | ± (5%+3) | 500VA |
| MT 72 BX | 0~5 (AC) | 0~ 100 (AC) | (0.0 ~ 999) s | ± (5%+3) | 500VA |
| MT 72 CX | 0~5 (AC / DC) | 0~ 100 / 20 (AC / DC) | (0.0 ~ 999) s | ± (5%+3) | 500VA |
| MT 72 DX | 0~5 (AC / DC) | 0~ 20 / 10 (AC / DC) | (0.0 ~ 999) s | ± (5%+3) | 100VA |
| MT 73 X | 0~5 (AC) | 0~ 200 (AC) | (0.0 ~ 999) s | ± (5%+3) | 1000VA |
| MT 50 | 0.10 ~ 5.00 (AC) | 0.100 – 100.0 (AC) | (0.0 – 999. 9) s | ± (2%+2) | 500VA |
| MT 51 | 0.10 ~ 5.00 (AC / DC) | 0.100 ~ 100.0 / 20.00 (AC / DC) | (0.0 – 999. 9) s | ± (2%+2) | 500VA |
| MT 52 | 0.10 – 5.00 (AC) | 0.100 ~ 20.00 (AC) | (0.0 – 999. 9) s | ± (2%+2) | 100VA |
| MT 53 | 0.10 ~ 5.00 (AC / DC) | 0.100 – 20.00 / 10.00 (AC / DC) | (0.0 – 999. 9) s | ± (2%+2) | 100VA |
| MT 01 | 0.50 ~ 10.00 (AC / DC) | 0.100 – 20.00 / 10.00 (AC / DC) | (0.0 – 999. 9) s | ± (2%+2) | 200VA |
GENERAL INFORMATION
What is High Voltage Test?
High Voltage Testing is done as a way to check the effectiveness of the insulation of the device to ensure it will operate safely during rated electrical conditions.
Why is High Voltage Test Done?
It is a high voltage test during maintenance programs to demonstrate that equipment can withstand surge voltages during operation. An overvoltage is usually applied between the primary and secondary of the transformer or between the secondary and ground for 60 seconds.
Reviews (0)
Related products
Digital Power Meter | MT9940N
Digital Power Meter | MT9940N; can Measure The Voltage,Current,Power,Power Factor,Frequency,Electric Energy And Other Parameters ,Rich In Content,Has A Wide Measuring Range, The Preset Alarm,Latches And Communications Function.
The MT9940N Series Has All The Measurement And Display Function,Increases The Maintain Data Function,As Well As The Display Function Of Frequency And Power (Energy) These Two Parameters On The Basis Of The Original RK9800. MT9901N Increase The Limit Alarm Function Of Current And Power Based On The MT9800N. MT9940N And RK9980N Expand The Range Of Current (Maximum For 40A And 80A Respectively)Based On RK9901N,It Can Measure The Current And The Products With More Power.
Dry Air Sterilization (Etüv) | MTED-Series
Dry Air Sterilization (Etüv) | MTED-Series; dry air sterilizers are designed for use in research and industrial laboratories, sterilization, drying, heating, heat treatment and long-term stability testing applications. They provide very good temperature control for homogeneous heat distribution and stable temperatures. Thanks to the fan circulation system controlled by a reliable and sensitive PID microprocessor control system, precise and constant temperatures are achieved. It has an easy to use LCD screen control panel.
Power Analyzer | MT9800N
Power Analyzer | MT9800N; has the function of preset alarm, latches and communication, with a wide measurement range, rich in content, which can measure voltage, current, power, power factor, frequency, electrical energy and other parameters.MT9800N, It has all the measurement and display function, increase the data protection function and display function of these two parameters of frequency and power (energy).
DEVICE INTRODUCTION VIDEO
Tracking Tester | MTC-LTE100
Tracking Tester | MTC-LTE100 has been produced in accordance with IEC60695 and IEC 60112 standards to determine the CTI (Comparative Tracking Index) and PTI (Proof Tracking Index) values of the pollution degree of the material originating from the external environment.
Reviews
There are no reviews yet.