High Voltage Test System 100 kV

High Voltage Test System 100 kV; is mainly composed of high voltage control unit and high voltage transformer and it is designed to perform AC / DC high voltage tests up to 100 kV.

Features

– English interface, ease of use
– Thanks to the 4.7 inch LCD screen, voltage, current, time, status information and other data can be read easily.
– During the test, the warning lights flash on the display; it gives the operator a safety warning and shows the time.
– By setting the desired current and voltage values, the test result can be taken automatically. At the end of the test, all results are recorded automatically.
– When the voltage increases to the set value with the self-timer and voltage control mode, the test period starts and the results are displayed, the device automatically returns to zero at the end of the period.
– The desired operation with manual control mode can be done by the user with buttons.
– Using hardware and software anti-interference technology, accurate results are obtained.

Power Source
· Voltage: AC220V ±% 10
· Frequency: 45 ~ 65Hz
· Maximum current: 45.5A

High Voltage Test System 100 kV Ambient Requirements

• Ambient temperature: -10 ℃ ～ 40 ℃
  · Relative humidity: ≤% 85
  Safety Parameters
  · Insulation resistance: > 2MΩ
  · Leakage current: ＜ 3.5mA
  · Max. Output voltage: 1500 V (50 Hz RMS). It can withstand 1 minute.
  Measurement accuracy
  · Current accuracy: + (% 2 x read + 1A)
  · Current accuracy level of this device: + (% 5 * read + 1A)
  · Voltage accuracy: + (% 5 * + 1KV) ’dir.
  · Triggered time accuracy: + (% 5 * read + 1KV)
  Control Unit Parameters
  · Control table output voltage: AC 0 ～ 250V
  · Control table output current: AC 0 ～ 50A
  · Time: 0 ～ 999s
  HV transformer parameters
  · Capacity: 10kVA
  · Input voltage: 0 ~ 200V
  · Input current: 0 ~ 50A
  · Output AC HV Voltage: 0 ~ 100kV
  · Output AC HV Current: 0 ~ 100mA
  · Output DC HV Voltage: 0 ~ 140kV
  · Output DC HV Current: 0 ~ 100mA
  · Output Meter Voltage: 0 ~ 100V