Technical Parameters
| DC high voltage | ≥ 15 kV |
| Pulse waveform time | 1.2 µs ± % 30 |
| Wave tail half value time | 50 µs ± % 20 |
| Pulse voltage | 2.5 kV ~ 15 kV ≤ ± % 5 |
| Pulse time range | 5 ~ 99 s |
| Number of pulses | 1 ~ 9999 |
| Polarity | Positive; negative |
Lightning İmpulse Voltage Test System 15 KV
Lightning İmpulse Voltage Test System 15 KV is designed to simulate a lightning pulse signal with a time to rise from 0 V to a peak voltage of 1.2 μs and a peak voltage to half-voltage of 50 μs.
Description
Related products
DC | AC Dielectric Test System
DC | AC Dielectric Test System is a transformer booster. It is the basic equipment for power station, power supply system and scientific research units. It is used in dielectric strength tests of various electrical devices and insulating materials.
Earth Resistance Tester
Earth Resistance Tester is applied to measure the earth resistance of equipment and conductive and resistive low resistance circuit in power system.
High Voltage Tester 30 KV
High Voltage Tester 30 KV is designed to perform High Voltage Tests up to 50 kV.
Frequency Response Analyzer
Frequency Response Analyzer is used to perform frequency response measurements of transformers.
Partial Discharge PD Detector
Partial Discharge PD Detector is designed to measure the location of global sound waves when partial discharges occur using ultrasonic sensors.
Tangent Delta Tester
Tangent Delta Tester is applied to measure the dielectric loss and capacitor value of insulation materials in high voltage power equipment. The non-power frequency voltage source is integrated in the tester to avoid power frequency interference. That make the tester has a good performance in measurement precision.
High Voltage Tester
High Voltage Tester is designed to perform high voltage testing of electrical devices in accordance with IEC 60065, IEC 60335, IEC 60601, IEC 60745, IEC 60884, IEC 61010, IEC 61029 and IEC 61558.
HVAC Variable Frequency Resonance Tester
HVAC Variable Frequency Resonance Tester is designed for AC voltage withstand test of 10 kV and 35 kV cable and power generators and 220 kV main transformer and subunits.
