AC Hipot Tester Mt Serisi, Hipot test device consists of test transformer and voltage control unit. The tester is used for insulation tests on power frequency insulation materials and power equipment. Hipot tester is low cost and easy to use. In this way, the test device is widely used in insulation tests whose test voltage and capacity are not very high.
Related products
Partial Discharge PD Detector
Partial Discharge PD Detector is designed to measure the location of global sound waves when partial discharges occur using ultrasonic sensors.
Lightning İmpulse Voltage Test System 15 KV
Lightning İmpulse Voltage Test System 15 KV is designed to simulate a lightning pulse signal with a time to rise from 0 V to a peak voltage of 1.2 μs and a peak voltage to half-voltage of 50 μs.
HV Phase Sequence Controller
HV Phase Sequence Controller used for detection of high-voltage power grid closing point on both sides of the phase sequence is the same. Two power line connection before must check phase sequence, or line may be short circuit. The instrument suitable for 0.4 kV ~ 220 kV power transmission line, and can test whether line charged. The Instrument adopts the wireless transmission technology, safe and reliable operation, easy to use.
Relay Tester | 3 Phase
Relay Tester | 3 Phase is applied to test the relay unit in relay protection system. At the same time it could be considered as a universal three phase AC/DC voltage source or current source.
Spectrum Analyser
Spectrum Analyser device is an instantaneous signal recorder applied in industry signal analysis. It takes IPC as the core for data sample and process. Special design makes the reorder has a good performance in anti-jamming and easy operation.
High Voltage Tester 50 kV
High Voltage Tester 50 kV is used for the extensive testing and analysis of the dielectric strength and insulation level of low voltage switchgear, various equipment, electrical machinery, power cord and similar parts at power frequency.
Circuit Breaker Analyser
Circuit Breaker Analyser is designed to measure values such as the closing and opening times of the circuit-breakers and the closing and opening speeds in accordance with TS EN 62271.
DC Hipot Testing Equipment 400 KV
DC Hipot Testing Equipment 400 KV are DC high voltage power supply equipment from 60 kV to 400 kV. It has over-voltage and over-current protection. They offer high stability and reliability. The ZGF series is easy to use, small in size and lightweight.
Reviews
There are no reviews yet.