Showing 1–12 of 59 results
AC / DC Digital Microammeter | MT-HVLA1000
AC / DC Digital Microammeter | MT-HVLA1000; used for the measurement of leakage current in high voltage side, effectively eliminating leakage current of high voltage generator and the effect on test result caused by lead leakage current. The instrument has a digital display, high precision, excellent anti-interference ability, impact resistance and so on.
AC Hipot Test System | MTXY-AB
AC Hipot Test System | MTXY-AB; is an effective and direct way to test insulation strength for electrical equipment, apparatus or machinery. It checks for dangerous defects that ensure the continuous operation of electrical equipment.
| Transformer Type | Panel Type Control Unit | Portable Box Type Controller |
| Dry Type | MTDP-10010 | MTDB-10010 |
| Oil Type | MTOP-10010 | MTOB-10010 |
| Sf6 (Gas) Type | MTSP-10010 | MTSB-10010 |
DEVICE INTRODUCTION VIDEO
Multichannel Hipot Tester (Insulation Tester) | MTJ-7122S
MTJ-7122S, It provides time-sharing scan test for multiple channels and simultaneous testing for multiple channels, which can quickly and accurately measure the withstand voltage insulation performance of electronic components, household appliances, transformers, lighting devices, power tools and heating devices to improve test efficiency.
Peak Voltage Voltmeter (Peak Voltmeter) | MT-DPV100
Peak Voltage Voltmeter (Peak Voltmeter) | MT-DPV100; The peak value of voltage is one of the parameters that must be measured in many test cases. A general voltmeter can only measure the effective value (root mean square value) of voltage, and it is difficult to accurately measure the voltage peak value, especially when the voltage waveform is turbulent, the peak voltage value should be used.
Peak Voltmeter | MT-PVE1141
Peak Voltmeter | MT-PVE1141; The peak value of voltage is one of the parameters that must be measured in many test cases. A general voltmeter can only measure the effective value (root mean square value) of voltage, and it is difficult to accurately measure the voltage peak value, especially when the voltage waveform is turbulent, the peak voltage value should be used.
DEVICE INTRODUCTION VIDEO
DEVICE SHORT VIDEO
Program-Controlled Withstand Voltage Tester | MT5020
Program-Controlled Withstand Voltage Tester | MT5020; program-controlled withstand voltage tester is a tester for testing the safety parameters of electronic products. It can be used for withstand voltage testing of electrical products such as household appliances, electronic instruments, electronic devices, electronic components, wires and cables.
Surge Voltage Tester | MT-30T
Surge Voltage Tester | MT-30T; is a1.2/50µs surge voltage tester, with the virtual front time of 1.2µs and a virtual time to half-value of 50s.The standard voltage wave form complies with the IEC 61008-1, IEC61009-1, (NO9.20)and IEC60947-1:(NO.4.3.1.3)surge voltage test and has been used for safety testing to determine if the clearance was fulfilled the safety requirement while the transient voltage in the circuit.
Withstand Voltage Tester | MT72CR
Withstand Voltage Tester | MT72CR; of MULTITECH is the measurement instrument for compressive strength,it mainly used for insulation leakage safety test of product.It can test the electrical safety performance index of breakdown voltage,leakage current of which all kind of the measured object intuitive,accurate and fast,and can be used for testing the components and overall performance as a high voltage source.