High Voltage Stationary Stand | DTE 15-4D
High Voltage Stationary Stand | DTE 15-4D; is designed for the following works:
- Tests of dielectric rubber gloves, a bot, electric tools, etc. Variable high voltage industrial frequency, adjustable within 100V – 15kV.
- Checks of neon lamps with variable voltage of industrial frequency, adjustable within 5 – 250V.
Features of the stand – the use of a “dry” high-voltage transformer in a set of test bath installation.
Description
High Voltage Stationary Stand DTE 15-4D; is designed for the following tasks:
– Testing dielectric rubber gloves, boots, power tools, etc. Voltage adjustable between 100V – 15kV.
– Control of industrial frequency neon lamps with variable voltage adjustable from 5 – 250V.
A ‘dry’ high voltage transformer has been used in a number of test bath installations.
Technical Specifications
| Parameter name | Value | |
| Power supply AC voltage | 220 ± 22, /50 ± 1 Гц | |
| Power consumption, at most | 0,9 | |
| Operation mode | «100В» | «15кВ» |
| Effective value of the maximum testing voltage | 0,250 | 15 |
| Reduced voltage measurement error | ± 3 | |
| Reduced voltage measurement error | 1 | 4 |
| Maximum measured leakage current, mA | not measured | 7,8 |
| Reduced current measurement error | — | ± 3 |
| Control unit weight, at most | 13 | |
| CU overall dimensions, mm | 430 х 370 х 225 | |
| Control unit weight, at most | 10 | |
Reviews (0)
Related products
High Voltage Digital Diode Device | DTE 70/50
High Voltage Digital Diode Device | DTE 70/50 is intended for testing and certification of high-voltage cables and dielectric insulators on distribution points of electrical networks and transformer substations, as part of mobile electrical laboratory. It can be used in stationary electrophysical laboratories as a high voltage source for solid dielectrics testing.
DTE-70/50D is a highly reliable time-tested metrological device. The digital panel device measures the dielectrics leakage current in both DC and AC voltage modes, which significantly increases the device application area.
High Voltage Rectifying Device | DTE 20/50kV
High Voltage Rectifying Device | DTE 20/50kV; is made as monoblock unit and is intended to supply a variety of technological and laboratory devices with bipolar rectified electric voltage in the values range from 0 to ± 25 kV.
The device is designed for use in stationary conditions indoors at operating temperatures from -10 °C to + 40 °C, up to 80% relative air humidity at +20°C and atmospheric pressure 84.0 – 106.7 kPa (630 – 800 mm. Hg. v.).
High Voltage Test System for Solid Dielectrics Testing
High Voltage Test System for Solid Dielectrics Testing
- Testing the high-voltage cables and the cables sheaths with 6,10,15,20 kW operating voltage and all types insulation such as XLPE and PILC.
- Testing insulators and other electric equipment by high voltage power frequency AC.
- Testing high-voltage switches’ vacuum chambers.
- Laboratory and research works.
Сircuit Breaker Testing Device | DTE 20M
Сircuit Breaker Testing Device; is intended for operability testing and ampere-second characteristics monitoring of circuit breakers by power frequency AC in the range 20A – 20kA. It is capable to measure and record time and values of current transmitted through the circuit breaker, hereinafter – CB. It can be used as a controlled power source of AC up to 20kA in low impedance power circuits.
Сircuit Breaker Testing Device | DTE-10M
Сircuit Breaker Testing Device | DTE-10M; is intended for testing and certification of high-voltage cables and dielectric insulators on distribution points of electrical networks and transformer substations, as part of mobile electrical laboratory. It can be used in stationary electrophysical laboratories as a high voltage source for solid dielectrics testing.
Reviews
There are no reviews yet.