High Voltage Stationary Stand | DTE-100D
High Voltage Stationary Stand | DTE-100D is designed for acceptance and maintenance testing of electric protective equipment used in electrical installations.
Description
High Voltage Stationary Stand | DTE-100D is designed for acceptance and maintenance testing of electric protective equipment used in electrical installations.
Stand allows testing of
- Rubber insulating gloves;
- Dielectric rubber boots and galoshes;
- Fitting and mounting tool with insulated handles (screwdrivers, wire cutters, pliers, etc.).
The stand can be used as a high voltage AC test system for insulation testing of such products as cables, insulators, etc.
High Voltage Stationary Stand | DTE-100D Technical specifications
| Parameter name | Value | |||
| Power supply AC voltage | 220 V ± 10% | |||
| Power supply frequency | 50 Hz ± 1 | |||
| Power consumption, at most | 0,9 kW | |||
| Operation mode | «100 V» | «15 kV» | «100 kV» | |
| Effective value of the maximum testing voltage | 0,1 kV | 15 kV | 100 kV | |
| Reduced voltage measurement error | ± 3 % | |||
| Testing seats quantity | 1 | 4 | 10* | |
| Maximum measured leakage current, mA | not measured | 7,6 | 20 | |
| Reduced current measurement error | — | ± 3 % | ||
| Control unit weight, at most | 18,5 kg | |||
| High voltage unit HVU-50 weight, at most | 42,5 kg | |||
| Testing bath weight, at most | 32 kg | |||
| Average service life | 10 years | |||
| Recommended area occupied by the stand, m | 3 X 5 | |||
Dimensions
| CU overall dimensions, mm | 415х220х360 |
| Overall dimensions of the testing bath, mm | 730х1060х450 |
| Overall dimensions of high voltage source HVU-50, mm | 365х670х295 |
| Recommended area occupied by the stand, m | 3 х 5 |
Reviews (0)
Related products
High Voltage Digital Diode Device | DTE 70/50
High Voltage Digital Diode Device | DTE 70/50 is intended for testing and certification of high-voltage cables and dielectric insulators on distribution points of electrical networks and transformer substations, as part of mobile electrical laboratory. It can be used in stationary electrophysical laboratories as a high voltage source for solid dielectrics testing.DTE-70/50D is a highly reliable time-tested metrological device. The digital panel device measures the dielectrics leakage current in both DC and AC voltage modes, which significantly increases the device application area.
Relay Protection Testing Device | DTE 450/3000
Relay Protection Testing Device DTE–450/3000 (hereinafter – device) is intended for
- adjustment and testing of simple relay protection (RPA) in place of their installation at power plants, substations, industrial plants or in the laboratory
- adjustment and testing of electroautomatics elements (electromagnetic relays, contactors, motor starters, etc.)
- adjustment and testing of circuit breakers
Сircuit Breaker Testing Device | DTE 20M
Сircuit Breaker Testing Device is intended for operability testing and ampere-second characteristics monitoring of circuit breakers by power frequency AC in the range 20A – 20kA. It is capable to measure and record time and values of current transmitted through the circuit breaker, hereinafter – CB. It can be used as a controlled power source of AC up to 20kA in low impedance power circuits.
Сircuit Breaker Testing Device | DTE-10M
Сircuit Breaker Testing Device | DTE-10M; is intended for testing and certification of high-voltage cables and dielectric insulators on distribution points of electrical networks and transformer substations, as part of mobile electrical laboratory. It can be used in stationary electrophysical laboratories as a high voltage source for solid dielectrics testing.
Reviews
There are no reviews yet.