High Frequency Spark Tester designed to test the adequacy of cable insulation according to IEC 62230 standard. The cable is placed on the production line and it ensures fast deterioration of the cable insulation, holes, errors that may occur during production and with high precision.
FEATURES
With this device, high frequency (around 3 kHz) sine voltage waves up to 15kV can be produced and bead electrodes (copper brush, carbon brush) can be applied to the cable insulation along the 5 cm channel. Compared to Mains Frequency Spark Tester, it takes up less space in the production line and it can be applied to up to 1000 meters per minute cable.
- Puncture / Skip counter
- High Voltage warning
- Audible and visual alarm in case of puncture / jump
- In case of puncture / jump, current is limited and the device is protected.
- Small volume and even small footprint.
- The instrument automatically terminates the test when the cover is opened.
High Frequency Spark Tester Technical Parameters
| Model | MT015A |
| Test Voltage | 1 – 15 kV |
| Cable diameter | 0-6 mm |
| Output frequency | 2 – 3.5 kHz |
| Current With Load | Resistive:4mA; Capacitive: 40mA |
| Cable rate | 1000 m / min |
| Electrode length | 50 mm |
| Electrode type | Bead Chain |
| Closing time | 0.2s/2s/5s |
| Length of signal cable | 5 metre |
| Display | Led |
| Power supply | 220V, 50/60 Hz |
| Weight | 17 kg |
Reviews
There are no reviews yet.