Çok Fonksiyonlu Elektriksel Güvenlik Test Cihazı, üretim hatlarında rutin testlerden AC ve DC yüksek gerilim testi, izolasyon testi, toprak süreklilik testi, kaçak akım testi, düşük başlatma ve güç testini tek bir cihazda gerçekleştirmek üzere tasarlanmıştır.

Rutin bandlarda kullanılmak üzere tasarlanmıştır.

Yüksek hassasiyet:% 1 doğruluk,

Yüksek hız:

Kapsamlı ve birden çok ürün için programlanabilme

Tek tuşla tüm testleri uygular

100 test koşulu grubu için program hafızası

Otomasyon genişletme: RS232 / RS485 / GPIB / Ethernet arayüzü (birisi seçilir),

Barkod tarama eklenebilir

Çok Fonksiyonlu Elektriksel Güvenlik Test Cihazı Parametreleri

AC withstand voltage test
Rated output capacity		200VA (5000V/40mA), short circuit current is greater than 200mA; (Optional: 500VA (5000V/100mA), short-circuit current greater than 200mA;)
Output voltage	Range / accuracy	100~5000V, ±(1%× setting +5V)
Output fre quency	Range / accuracy	50Hz or 60Hz, ±0.1%× setting
Alarm current	Upper limit / accuracy	0.10~40.00mA, ±(1%× setting +5 words)
Alarm current	Lower limit / accuracy	0.000~9.999mA, ±(1%× setting +5 words)
Time	Range	0.5~999.9s (0: infinite time)
	Ramp- up time	0.1~999.9s (0: off)
	Ramp- down time	0.1~999.9s (0: off)
	Accuracy	± (0.2%× setting +1 word)
Measure meter	Voltage range / accuracy	0.01~5.00kV, ± (1%× reading +2 words)
	Current range / accuracy	0.10~40.00mA, ± (1%× reading +5 words)
	Time range / accuracy	0.1~999.9s, ± (0.2%× reading +1 word)
Output voltage wave, distortion, adjusting rate		Sine wave, less than 2% (pure resistive load), ± (1% × setting + 5V) (from zero to full load)
Start voltage		(0%~50%)× output voltage setting
Current compensation		0.000~40.00mA, Auto/manual
Arc detection		Level 1~9, 9: highest level; 0: off
DC withstand voltage test
Output voltage	Range / accuracy	100~6000Vdc, ± (1%× setting +5V)
Alarm current	Upper limit / accuracy	0~10000μA, ± (1%× setting +5 words)
Alarm current	Lower limit / accuracy	0.0~999.9μA, ± (1%× setting +5 words)
Time	Range	0.5~999.9s(0: infinite time)
	Ramp- up time	0, 0.4~999.9s (0: off)
	Ramp- down time	0, 1.0~999.9s (0: off)
	Accuracy	± (0.2%× setting +1 word)
Measure meter	Voltage range / accuracy	0.01~6.00Vdc，±(1%×读数值+2个字) 0.01~6.00Vdc, ± (1%× reading +2 words)
	Current range / accuracy	0.0~10000uA, ± (1%× reading +5 words)
	Time range / accuracy	0.1~999.9s, ± (0.2%× reading +1 word)
Rated output capacity		60VA(6000Vdc/10mA)
Output adjustment		± (1%× setting +2V), zero to full load
Compensation current		0 ~200.0μA, Auto/manual
Start voltage		(0%~50%)×output voltage setting
Charging current lower limit		(0~3.500) μA, Auto/manual
Discharge time		≤200ms
Arc detection		Level 1~9, 9: highest level; 0: off
Insulation resistance test
Output voltage	Range / accuracy	100~2500Vdc, ± (1%× setting +5V)
Alarm resis tance	Upper / lower limit	0.1MΩ~999.99MΩ，1000MΩ~50000MΩ 0.1MΩ~999.99MΩ, 1000MΩ~50000MΩ, the upper limit includes no upper limit setting
Alarm resis tance	Accuracy	100-499V, 0.10MΩ~999.99MΩ, 1000~2000MΩ, ± (5%× setting +2 words) 500-2500V, 0.10~999.99MΩ, ± (2%× setting +2 words), 1000~9999MΩ, ± (5%× setting +2 words) 10000~50000MΩ, ± (15%× setting +2 words)
Time	Ramp- up time	0,0.1~999.9s (0: off)
	Delay decision time	0, 0.5~999.9s (0: infinite)
	Range	0, 0.5~999.9s (0: infinite)
	Ramp- down time	0, 1.0~999.9s (0: off)
	Accuracy	± (0.1%× setting +0.1s)
Measure meter	Voltage range / accuracy	100~2500Vdc, ± (2%× reading +5 words)
	Resistance range / accuracy	Range: 0.100 MΩ~9.999 MΩ, 10.00 MΩ~99.99 MΩ, 100.0 MΩ~999.9 MΩ, 1.000 GΩ~50.00GΩ Resolution: 0.001 MΩ, 0.01 MΩ, 0.1 MΩ, 0.001GΩ, 0.01GΩ 100-499V, 0.10~9.999MΩ, 10.00~99.99MΩ, 100.0~999.9MΩ, 1~2GΩ, ± (5%× reading +2 words) 500-2500V, 0.100~9.999MΩ, 10.00~99.99MΩ, 100.0~999.9MΩ, ± (2%× reading +2 words), 1.000~9.999GΩ, ± (5%× reading +2 words) 10.00~50.00GΩ, ± (15%× reading +2 words)
	Time range / accuracy	0.1~999.9s, ± (0.2%× reading +1 word)
Charging current lower limit		0~3.500μA, Auto/manual
Grounding resistance test
Rated output		Maximum output current: 32A; maximum test resistance: 600mΩ; maximum open circuit voltage: 12V
Output current	Range / accuracy	2.0~32.0A, ± (1%× setting +2 words)
Output voltage	Range / accuracy	3.0~6.4V , ± (1%× setting +2 words)
Output fre quency	Range / accuracy	Sine wave, 50Hz or 60Hz, ±0.1%× setting
Alarm limit	Resistance upper / lower limit	Range: (0.1~600)mΩ (2.0~10.6)A; (0.1~R)mΩ (10.7~32.0)A, R= (6400/current setting) mΩ. As the current scale is switched, the tester will automatically calculate the maximum scale. Resolution: 0.1/1 mΩ
Alarm limit	Error	± (1%× setting +2 words)
Compen sation resistance	Range	0~100 mΩ, automatic measurement , compensation On/Off
Test time	Range / accuracy	0.5~999.9s (0: infinite); ± (0.2%× setting + 1 word)
Measure meter	Current range / accuracy	2.0~32.0A( or 64A), ± (1%× reading +2 words)
Measure meter	Voltage range / accuracy	3.0~10.0V , ± (1%× reading +2 words)
Resis tance range / accuracy		10.0~99.9~100~600mΩ;± (1%× reading +2 words)
Time range / accuracy		0.5~999.9s (0: infinite); ± (0.2%× setting +1 word)
Leakage current test
Leak test body network (MD card)	Standard network, GB/T 12113 Fig. 4; (*Optional: other leak test network)*
Probe position		Ground leakage current: G-L, G-N, AUTO (G-L, G-N); Surface leakage current: PH, PL
Test power state		Polarity switch: On/Off/Auto; Ground switch: On/Off Zero line connection switch: On/Off
Test voltage output		Single-phase, with external isolation transformer or variable frequency power supply to provide the required test voltage and frequency.
Test voltage upper / lower limit		Upper/lower limit Range: 0.0V~300.0V AC, Resolution: 0.1V, 45Hz~65Hz, Error: ± (0.4%× setting +0.1%× scale)
Test voltage measure ment		Range: 0.0V~300.0V, 45Hz~65Hz, Resolution: 0.1V, 45Hz~65Hz, Accuracy: 20.0V~300.0V: ± (0.4%× reading +0.1%× scale)
Load current		20A
Current upper / lower limit (RMS)		Range: 0.0uA~999.9uA, 1000uA~9999uA, 10.00mA~12.00mA Resolution: 0.1uA, 1uA, 0.01mA Error: 0.0uA~999.9uA: DC: ± (1.5%× setting + 10 words) 15Hz≤f≤100kHz: ± (1.5%× setting + 10 words) 100kHz＜f≤1000kHz, 10.0uA~999.9uA: ±5%× setting 1000uA~7999uA: DC: ± (1.5%× setting + 10 words) 15Hz≤f≤100kHz: ± (1.5%× setting + 10 words) 100kHz＜f≤1000kHz, 10uA~7999uA: ±5%× setting 8.00mA~12.00mA: DC: ± (1.5%× setting + 10 words) 15Hz≤f＜1000kHz, 0.01mA~12.00mA: ±5%× setting
Current measure ment (RMS)		0.0uA~999.9uA: Resolution: 0.1uA DC: ± (1.5%× reading + 10 words) 15Hz≤f≤100kHz: ± (1.5%× reading + 10 words) 100kHz＜f≤1000kHz, 10.0uA~999.9uA: ±5%× reading 1000uA~7999uA: Resolution: 1uA DC: ± (1.5%× reading + 10 words) 15Hz≤f≤100kHz: ± (1.5%× reading + 10 words) 100kHz＜f≤1000kHz, 10uA~7999uA: ±5%× reading 8.00mA~12.00mA: Resolution: 0.01mA DC: ± (1.5%× reading + 10 words) 15Hz≤f＜1000kHz, 0.01mA~12.00mA: ±5%× reading
Current compen sation		Range: 0.000 ~ 1.000mA, automatic measurement, On/Off.
Test time		Range: 0, (1 ~ 999.9), 0: infinite, Resolution: 0.1s, accuracy: ± (1% × setting +1 word). When the test mode is AUTO (G-L, G-N), the time is half.
Power para meter test
Power para meter test	Alarm	Power upper/lower limit alarm; On/Off of upper/lower limit alarm of voltage, current and power factor.
	Power upper / lower limit	Range: 0.00W~99.99W, 100.0W~999.9W, 1000W~6000W Resolution: 0.01W, 0.1W, 1W Accuracy:±(0.1%× setting +0.1%× scale)
	Active power measure ment	Range: 0.100W~9.999W, 10.00W~99.99W, 100.0W~999.9W, 1.000kW~6.000kW, Resolution: 0.001W, 0.01W, 0.1W, 0.001kW Accuracy: PF＞0.5: ± (0.1%× reading +0.1%× scale) PF≤0.5: ± (0.4%× reading +0.1%× scale)
	Voltage upper / lower limit	When voltage alarm is On Range: 0.00V~99.99V, 100.0V~300.0V, Resolution: 0.01V, 0.1V; Error: ± (0.1%× setting +0.1%× scale), 45Hz≤f≤65Hz
	Voltage measure ment	Scale: 300V, crest factor ≤1.6 Range: 5.00V~99.99V, 100.0V~300.0V, Resolution: 0.01V, 0.1V; Resolution:± (0.1%× reading +0.1%×scale), 45Hz≤f≤65Hz
	Current upper / lower limit	When current Alarm is On Range: 0.00mA~99.99mA, 100.0mA~999.9mA, 1.000A~9.999A, 10.00A~20.00A Resolution: 0.01mA, 0.1mA, 0.001A, 0.01A Error: ± (0.1%× setting +0.1%× scale), 45Hz≤f≤65Hz
	Current measure ment	Range: 20A, crest factor ≤1.6 Range: 10.00mA~99.99mA, 100.0mA~999.9mA, 1.000A~9.999A, 10.00A~20.00A Resolution: 0.01mA, 0.1mA, 0.001A, 0.01A Resolution: ± (0.1%× reading +0.1%× scale), DC, 45Hz≤f≤65Hz,
	Power factor upper / lower limit	When power factor alarm is On Range: ± (0.100~1.000), Resolution: 0.001
	Power factor measure ment	Range: ± (0.100~1.000), Resolution: 0.001 Resolution: ±0.01(Voltage/current amplitude is greater than 10% of the corresponding scale)
	Frequency	Range: 45.00Hz≤f≤65.00Hz, Resolution: 0.01Hz
	Test time	Range: 0, (0.5~999.9)s, 0: infinite, Resolution: 0.1s, Resolution: ± 0.2% × setting +1 word
LV Start Test
LV Start Test	Current upper / lower limit	Range: (0.00~25.00)A, Resolution: 0.01A Error: ± (0.1%× setting +0.1%× scale)
	Current measure ment	Range: 25A, crest factor ≤1.6 Range: (0.02~25.00)A, Resolution: 0.01A Resolution: ± (0.1%× reading +0.1%× scale), 45Hz≤f≤65Hz
	Voltage measure ment	Range: 300.0V, crest factor ≤1.6 Range: 5.00V~300.0V, Resolution: 0.01V/0.1V; Resolution: ± (0.1%× reading +0.1%× scale), 45Hz≤f≤65Hz
	Test time	Range: 0, (0.5~999.9)s, 0: infinite, Resolution: 0.1s, Resolution: ± 0.2% × setting +1 word
Çok Fonksiyonlu Elektriksel Güvenlik Test Cihazı General Specification
Verification & Calibration environ ment		23℃±5℃, (45~75) %RH , less dust
Operating environment		0 ~40℃, , (5~90) %RH , less dust
Storage environment		-10~55℃, (5~95) %RH , less dust
Power supply		220V±10%，50Hz±5%
Power consumption		Maximum 1000VA (excluding operating power of objects under test)
AN 1640 B	Weight (excluding packaging)	Approx. 40kg
AN 1640 B	Dimension (excluding packaging, mm)	483(W)x 550(D)x 175(H)
AN 1651 B	Weight (excluding packaging)	Approx. 80kg
AN 1651 B	Dimension (excluding packaging, mm)	483(W)x 600(D)x 1355(H)

cok fonksiyonlu elektriksel guvenlik cihazi

Büyütmek için tıklayın

Çok Fonksiyonlu Elektriksel Güvenlik Test Cihazı

Stok kodu: AN1640B(F)/AN1651B(F) Kategoriler: Güvenlik Test Cihazları

Açıklama
İnceleme (0)

Açıklama

AC withstand voltage test
Rated output capacity		200VA (5000V/40mA), short circuit current is greater than 200mA; (Optional: 500VA (5000V/100mA), short-circuit current greater than 200mA;)
Output voltage	Range / accuracy	100~5000V, ±(1%× setting +5V)
Output fre quency	Range / accuracy	50Hz or 60Hz, ±0.1%× setting
Alarm current	Upper limit / accuracy	0.10~40.00mA, ±(1%× setting +5 words)
Alarm current	Lower limit / accuracy	0.000~9.999mA, ±(1%× setting +5 words)
Time	Range	0.5~999.9s (0: infinite time)
	Ramp- up time	0.1~999.9s (0: off)
	Ramp- down time	0.1~999.9s (0: off)
	Accuracy	± (0.2%× setting +1 word)
Measure meter	Voltage range / accuracy	0.01~5.00kV, ± (1%× reading +2 words)
	Current range / accuracy	0.10~40.00mA, ± (1%× reading +5 words)
	Time range / accuracy	0.1~999.9s, ± (0.2%× reading +1 word)
Output voltage wave, distortion, adjusting rate		Sine wave, less than 2% (pure resistive load), ± (1% × setting + 5V) (from zero to full load)
Start voltage		(0%~50%)× output voltage setting
Current compensation		0.000~40.00mA, Auto/manual
Arc detection		Level 1~9, 9: highest level; 0: off
DC withstand voltage test
Output voltage	Range / accuracy	100~6000Vdc, ± (1%× setting +5V)
Alarm current	Upper limit / accuracy	0~10000μA, ± (1%× setting +5 words)
Alarm current	Lower limit / accuracy	0.0~999.9μA, ± (1%× setting +5 words)
Time	Range	0.5~999.9s(0: infinite time)
	Ramp- up time	0, 0.4~999.9s (0: off)
	Ramp- down time	0, 1.0~999.9s (0: off)
	Accuracy	± (0.2%× setting +1 word)
Measure meter	Voltage range / accuracy	0.01~6.00Vdc，±(1%×读数值+2个字) 0.01~6.00Vdc, ± (1%× reading +2 words)
	Current range / accuracy	0.0~10000uA, ± (1%× reading +5 words)
	Time range / accuracy	0.1~999.9s, ± (0.2%× reading +1 word)
Rated output capacity		60VA(6000Vdc/10mA)
Output adjustment		± (1%× setting +2V), zero to full load
Compensation current		0 ~200.0μA, Auto/manual
Start voltage		(0%~50%)×output voltage setting
Charging current lower limit		(0~3.500) μA, Auto/manual
Discharge time		≤200ms
Arc detection		Level 1~9, 9: highest level; 0: off
Insulation resistance test
Output voltage	Range / accuracy	100~2500Vdc, ± (1%× setting +5V)
Alarm resis tance	Upper / lower limit	0.1MΩ~999.99MΩ，1000MΩ~50000MΩ 0.1MΩ~999.99MΩ, 1000MΩ~50000MΩ, the upper limit includes no upper limit setting
Alarm resis tance	Accuracy	100-499V, 0.10MΩ~999.99MΩ, 1000~2000MΩ, ± (5%× setting +2 words) 500-2500V, 0.10~999.99MΩ, ± (2%× setting +2 words), 1000~9999MΩ, ± (5%× setting +2 words) 10000~50000MΩ, ± (15%× setting +2 words)
Time	Ramp- up time	0,0.1~999.9s (0: off)
	Delay decision time	0, 0.5~999.9s (0: infinite)
	Range	0, 0.5~999.9s (0: infinite)
	Ramp- down time	0, 1.0~999.9s (0: off)
	Accuracy	± (0.1%× setting +0.1s)
Measure meter	Voltage range / accuracy	100~2500Vdc, ± (2%× reading +5 words)
	Resistance range / accuracy	Range: 0.100 MΩ~9.999 MΩ, 10.00 MΩ~99.99 MΩ, 100.0 MΩ~999.9 MΩ, 1.000 GΩ~50.00GΩ Resolution: 0.001 MΩ, 0.01 MΩ, 0.1 MΩ, 0.001GΩ, 0.01GΩ 100-499V, 0.10~9.999MΩ, 10.00~99.99MΩ, 100.0~999.9MΩ, 1~2GΩ, ± (5%× reading +2 words) 500-2500V, 0.100~9.999MΩ, 10.00~99.99MΩ, 100.0~999.9MΩ, ± (2%× reading +2 words), 1.000~9.999GΩ, ± (5%× reading +2 words) 10.00~50.00GΩ, ± (15%× reading +2 words)
	Time range / accuracy	0.1~999.9s, ± (0.2%× reading +1 word)
Charging current lower limit		0~3.500μA, Auto/manual
Grounding resistance test
Rated output		Maximum output current: 32A; maximum test resistance: 600mΩ; maximum open circuit voltage: 12V
Output current	Range / accuracy	2.0~32.0A, ± (1%× setting +2 words)
Output voltage	Range / accuracy	3.0~6.4V , ± (1%× setting +2 words)
Output fre quency	Range / accuracy	Sine wave, 50Hz or 60Hz, ±0.1%× setting
Alarm limit	Resistance upper / lower limit	Range: (0.1~600)mΩ (2.0~10.6)A; (0.1~R)mΩ (10.7~32.0)A, R= (6400/current setting) mΩ. As the current scale is switched, the tester will automatically calculate the maximum scale. Resolution: 0.1/1 mΩ
Alarm limit	Error	± (1%× setting +2 words)
Compen sation resistance	Range	0~100 mΩ, automatic measurement , compensation On/Off
Test time	Range / accuracy	0.5~999.9s (0: infinite); ± (0.2%× setting + 1 word)
Measure meter	Current range / accuracy	2.0~32.0A( or 64A), ± (1%× reading +2 words)
Measure meter	Voltage range / accuracy	3.0~10.0V , ± (1%× reading +2 words)
Resis tance range / accuracy		10.0~99.9~100~600mΩ;± (1%× reading +2 words)
Time range / accuracy		0.5~999.9s (0: infinite); ± (0.2%× setting +1 word)
Leakage current test
Leak test body network (MD card)	Standard network, GB/T 12113 Fig. 4; (*Optional: other leak test network)*
Probe position		Ground leakage current: G-L, G-N, AUTO (G-L, G-N); Surface leakage current: PH, PL
Test power state		Polarity switch: On/Off/Auto; Ground switch: On/Off Zero line connection switch: On/Off
Test voltage output		Single-phase, with external isolation transformer or variable frequency power supply to provide the required test voltage and frequency.
Test voltage upper / lower limit		Upper/lower limit Range: 0.0V~300.0V AC, Resolution: 0.1V, 45Hz~65Hz, Error: ± (0.4%× setting +0.1%× scale)
Test voltage measure ment		Range: 0.0V~300.0V, 45Hz~65Hz, Resolution: 0.1V, 45Hz~65Hz, Accuracy: 20.0V~300.0V: ± (0.4%× reading +0.1%× scale)
Load current		20A
Current upper / lower limit (RMS)		Range: 0.0uA~999.9uA, 1000uA~9999uA, 10.00mA~12.00mA Resolution: 0.1uA, 1uA, 0.01mA Error: 0.0uA~999.9uA: DC: ± (1.5%× setting + 10 words) 15Hz≤f≤100kHz: ± (1.5%× setting + 10 words) 100kHz＜f≤1000kHz, 10.0uA~999.9uA: ±5%× setting 1000uA~7999uA: DC: ± (1.5%× setting + 10 words) 15Hz≤f≤100kHz: ± (1.5%× setting + 10 words) 100kHz＜f≤1000kHz, 10uA~7999uA: ±5%× setting 8.00mA~12.00mA: DC: ± (1.5%× setting + 10 words) 15Hz≤f＜1000kHz, 0.01mA~12.00mA: ±5%× setting
Current measure ment (RMS)		0.0uA~999.9uA: Resolution: 0.1uA DC: ± (1.5%× reading + 10 words) 15Hz≤f≤100kHz: ± (1.5%× reading + 10 words) 100kHz＜f≤1000kHz, 10.0uA~999.9uA: ±5%× reading 1000uA~7999uA: Resolution: 1uA DC: ± (1.5%× reading + 10 words) 15Hz≤f≤100kHz: ± (1.5%× reading + 10 words) 100kHz＜f≤1000kHz, 10uA~7999uA: ±5%× reading 8.00mA~12.00mA: Resolution: 0.01mA DC: ± (1.5%× reading + 10 words) 15Hz≤f＜1000kHz, 0.01mA~12.00mA: ±5%× reading
Current compen sation		Range: 0.000 ~ 1.000mA, automatic measurement, On/Off.
Test time		Range: 0, (1 ~ 999.9), 0: infinite, Resolution: 0.1s, accuracy: ± (1% × setting +1 word). When the test mode is AUTO (G-L, G-N), the time is half.
Power para meter test
Power para meter test	Alarm	Power upper/lower limit alarm; On/Off of upper/lower limit alarm of voltage, current and power factor.
	Power upper / lower limit	Range: 0.00W~99.99W, 100.0W~999.9W, 1000W~6000W Resolution: 0.01W, 0.1W, 1W Accuracy:±(0.1%× setting +0.1%× scale)
	Active power measure ment	Range: 0.100W~9.999W, 10.00W~99.99W, 100.0W~999.9W, 1.000kW~6.000kW, Resolution: 0.001W, 0.01W, 0.1W, 0.001kW Accuracy: PF＞0.5: ± (0.1%× reading +0.1%× scale) PF≤0.5: ± (0.4%× reading +0.1%× scale)
	Voltage upper / lower limit	When voltage alarm is On Range: 0.00V~99.99V, 100.0V~300.0V, Resolution: 0.01V, 0.1V; Error: ± (0.1%× setting +0.1%× scale), 45Hz≤f≤65Hz
	Voltage measure ment	Scale: 300V, crest factor ≤1.6 Range: 5.00V~99.99V, 100.0V~300.0V, Resolution: 0.01V, 0.1V; Resolution:± (0.1%× reading +0.1%×scale), 45Hz≤f≤65Hz
	Current upper / lower limit	When current Alarm is On Range: 0.00mA~99.99mA, 100.0mA~999.9mA, 1.000A~9.999A, 10.00A~20.00A Resolution: 0.01mA, 0.1mA, 0.001A, 0.01A Error: ± (0.1%× setting +0.1%× scale), 45Hz≤f≤65Hz
	Current measure ment	Range: 20A, crest factor ≤1.6 Range: 10.00mA~99.99mA, 100.0mA~999.9mA, 1.000A~9.999A, 10.00A~20.00A Resolution: 0.01mA, 0.1mA, 0.001A, 0.01A Resolution: ± (0.1%× reading +0.1%× scale), DC, 45Hz≤f≤65Hz,
	Power factor upper / lower limit	When power factor alarm is On Range: ± (0.100~1.000), Resolution: 0.001
	Power factor measure ment	Range: ± (0.100~1.000), Resolution: 0.001 Resolution: ±0.01(Voltage/current amplitude is greater than 10% of the corresponding scale)
	Frequency	Range: 45.00Hz≤f≤65.00Hz, Resolution: 0.01Hz
	Test time	Range: 0, (0.5~999.9)s, 0: infinite, Resolution: 0.1s, Resolution: ± 0.2% × setting +1 word
LV Start Test
LV Start Test	Current upper / lower limit	Range: (0.00~25.00)A, Resolution: 0.01A Error: ± (0.1%× setting +0.1%× scale)
	Current measure ment	Range: 25A, crest factor ≤1.6 Range: (0.02~25.00)A, Resolution: 0.01A Resolution: ± (0.1%× reading +0.1%× scale), 45Hz≤f≤65Hz
	Voltage measure ment	Range: 300.0V, crest factor ≤1.6 Range: 5.00V~300.0V, Resolution: 0.01V/0.1V; Resolution: ± (0.1%× reading +0.1%× scale), 45Hz≤f≤65Hz
	Test time	Range: 0, (0.5~999.9)s, 0: infinite, Resolution: 0.1s, Resolution: ± 0.2% × setting +1 word
Çok Fonksiyonlu Elektriksel Güvenlik Test Cihazı General Specification
Verification & Calibration environ ment		23℃±5℃, (45~75) %RH , less dust
Operating environment		0 ~40℃, , (5~90) %RH , less dust
Storage environment		-10~55℃, (5~95) %RH , less dust
Power supply		220V±10%，50Hz±5%
Power consumption		Maximum 1000VA (excluding operating power of objects under test)
AN 1640 B	Weight (excluding packaging)	Approx. 40kg
AN 1640 B	Dimension (excluding packaging, mm)	483(W)x 550(D)x 175(H)
AN 1651 B	Weight (excluding packaging)	Approx. 80kg
AN 1651 B	Dimension (excluding packaging, mm)	483(W)x 600(D)x 1355(H)