Microohmmeter | MTR-2512N
Back to products
Transformer DC Resistance Tester 40 Amper | MTS-TWR-40
Click to enlarge

Electromagnetic Precision Flow Meter | LT-LDE-DN15

LT-LDE-DN15 Electromagnetic Precision Flowmeter; For IP tests, a safe measurement value is taken by precise measurement of the flow rate.

Order Now
SKU: LT-LDE-DN15E Categories: , Tags: , , ,
Description

LT-LDE-DN15 Electromagnetic Precision Flowmeter; For IP tests, a safe measurement value is taken by precise measurement of the flow rate.

LT-LDE-DN15 Technical Parameters

ModelLT-LDE-DN15
Power Suplly85V AC – 265VAC or 110VAC to 420V AC or 24V DC
Voltage Range0.02 -15 m / s
Velocity Resolution0.5 mm/sec
Excitation Current 125mA-160mA-250mA
Excitation Frequency 25Hz-12.5Hz-6.25Hz-3.125Hz
Output Current 4 to 20mA
Resistance 0~750Ω
Measurement Accuracy0.1%±10uA
Photoelectric Isolation, Isolation voltage> 1000VDC
Max. Withstand Voltage 36VDC
Max. Withstand Current 30mA

 

Working Conditions
Ambient Temperature-20~+65°C
Relative Humidity 5%~90%
Power: Less than 10W (after connecting the sensor)
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Electromagnetic Precision Flow Meter | LT-LDE-DN15”

Your email address will not be published. Required fields are marked *

Related products

Bridge Fixtures | MT-DQ-1

DQ Type resistance bridge is required for connecting the cable sample and making the resistance measurement for cable resistance measurements according to TS EN 60245-1 standard.
Read more
Quick view
Multitech-Güç-Analizörü

Digital Power Meter | MT9940N

MT9940N Series Intelligent Electric Quantity Measuring Instrument(Digital Power Meter), Can Measure The Voltage,Current,Power,Power Factor,Frequency,Electric Energy And Other Parameters ,Rich In Content,Has A Wide Measuring Range, The Preset Alarm,Latches And Communications Function. The MT9940N Series Has All The Measurement And Display Function,Increases The Maintain Data Function,As Well As The Display Function Of Frequency And Power (Energy) These Two Parameters On The Basis Of The Original RK9800. MT9901N Increase The Limit Alarm Function Of Current And Power Based On The MT9800N. MT9940N And RK9980N Expand The Range Of Current (Maximum For 40A And 80A Respectively)Based On RK9901N,It Can Measure The Current And The Products With More Power.
Read more
Quick view

Grounding Resistance Tester | MT78XR

The mt78xr grounding resistance tester ıs used to measure the ınternal grounding resistance of electrical equipment, which ıt reflect the (contact) resistance between the total ground terminals of the electrical equipment. It ıs suitable for measuring the resistance value between the outer casing and the ground wire of various kinds of motors, electric appliances, ınstruments and meters, domestic appliance and so on. This series of tester according to the following standards:standard for household electrical appliances (IEC6035, GB4706.1-2001,  GB4706.1-1998), standard for lamp(IEC60598-1-1999,  GB7000.1-2000), standard for ınformation (GB8898-2001, GB12113. GB4943-2001,  IEC60065,IEC60950) and so on.
Read more
Quick view

Needle Flame Tester | MTC-NFE100

Needle Flame Tester device meets the standard of EN/IEC 60695-11-5. This device is designed to apply the needle flame test to the equipment, its sub-units and components, and to solid electrical insulation materials or other combustible materials.
Read more
Quick view
oil breakdown tester

Oil Breakdown Tester

Oil Breakdown Tester is designed to test the high voltage strength of transformer oils, which are easily oxidized and lose their insulation properties due to humidity and extreme temperatures.
Read more
Quick view

Precision LCR Meter | MTJ-2817N

Precision LCR Meter is designed to perform precise measurements of Inductance (L), Capacitance (C) and Resistance (R).
Read more
Quick view

Spark Tester | MT-S15K

MT-S15K, spark tester is a special test equipment for insulation defects of wire and cable.Spark Tester is designed to test the adequacy of cable insulation / insulation in accordance with TS EN 62230 standard. By placing the cable on the production line, it ensures that the deterioration, holes and errors that may occur in the cable insulation during production are detected quickly and with high precision.
Read more
Quick view

Tracking Tester | MTC-LTE100

MTC-LTE100 has been produced in accordance with IEC60695 and IEC 60112 standards to determine the CTI (Comparative Tracking Index) and PTI (Proof Tracking Index) values of the pollution degree of the material originating from the external environment.
Read more
Quick view