Main features
* Comply with CCC, IEC/EN,VDE, BS, UL, JIS standard requirements.
* Latest international standard: 500VA AC Hi-pot capacity(AC 5KV/100mA), short-circuit output current exceeds 200mA. Built-in optional leakage current test network MD card, meeting requirements of different industrial standards. Maximum test current of Ground Bond resistance is up to 64A,
* 6 in 1: AC Hi-pot, Insulation Resistance, Ground Bond resistance, Leakage Current, Running Power, Low-Voltage Start,
* Standby power consumption is optional for AN9651F(F)and AN9651S(F), minimum is low to 0.50W, accuracy is 0.2%,
* Simple operation: LED backlit screen display menu operation, Chinese/English languages, socket test fixture,
* Flexible configuration: Built in isolated transformer, AC frequency conversion power supply, frequency conversion power supply and industrial PC combination,
* Satisfy latest requirements: Follow the production line developing trends of comprehensive, fast, automation and information. Satisfy quality management, 5s management and refit management requirements.
Technical Parameters:
| AC Hipot test | ||
| Booster rated output capacity | 500VA（5000V/100mA） | |
| Booster maximum short-circuit current | >200mA | |
| Output waveform | Sine wave, <3%（pure resistance，5000V/1mA），<3%（From empty load to full load） | |
| Output voltage setting | Range | 500～5000V |
| Resolution | 5V | |
| Accuracy | ±（3%×setting+10V） | |
| Frequency setting | Range | 50Hz/60Hz |
| Accuracy | ±0.1%×setting | |
| Alarming limits setting | Current upper-limit | 0.10～99.99mA |
| Current lower-limit | 0.00～10.00mA | |
| Compensation current setting | Range | 0.00～10.00mA, automatic testing, compensation can be set to ON/OFF |
| Time setting | Range | 1～999s |
| Ramp up time range | 1～100s | |
| Accuracy | ±（0.1%×setting+1count） | |
| Breakdown current alarm | Range | |
| Accuracy | ||
| Insulation Resistance Test | ||
| Rated output capacity | 2VA（1000V/2mA） | |
| Output voltage regulation | <3%（From no load to full load） | |
| Output voltage ripple | <1% | |
| Output voltage setting | Range | DC 500Vor1000V |
| Accuracy | ±（3%×setting+3counts） | |
| Alarming limits setting | Resistance upper-limit range | 0.0～99.9 MΩ，100～2000MΩ（If upper-limit is set to 0, it will not make adjudgment for upper limit） |
| Resistance lower-limit range | 0.3～99.9 MΩ, 100～2000MΩ | |
| Time setting | Range | 1～999s |
| Accuracy | ±（0.1%×setting+1count） | |
| Insulation resistance measurement | Range | 0.0～99.9 MΩ, 100～2000 MΩ |
| Accuracy | ≤200MΩ: ±（3%×reading+3counts） | |
| ＞200MΩ:±（8%×reading+8counts） | ||
| Ground Bond Resistance test | ||
| No load output voltage | <12V | |
| Output current setting | Range | 3～30A |
| Accuracy | ±（3%×setting+0.2A） | |
| Current range instruction | Optional: 3 ~ 64A test current | |
| Current frequency setting | Range | Sine waveform 50Hz/60Hz |
| Accuracy | ±0.1%×setting | |
| Test time setting | Range | 1～999s |
| Accuracy | ±（0.1%×setting+1count） | |
| Result display mode | Ground resistance or voltage | |
| Ground resistance display mode | ||
| Alarming limits setting | Resistance upper-limit range | 3A≤output current≤10A:10～600 mΩ |
| Resistance lower-limit range | 0～100 mΩ | |
| Compensation resistance setting | Range | 0～200 mΩ, automatic testing, compensation can be set to ON/OFF |
| Ground bond resistance measurement | Range | 10～600 mΩ |
| Accuracy | ±（3%×reading+ 5counts） | |
| Ground voltage display mode | ||
| Alarming limits setting | Voltage upper-limit range | 30～7500 mV |
| Voltage lower-limit range | 0～3000 mV | |
| Compensation voltage setting | Range | 0～1000 mV, automatic testing, compensation can be set to ON/OFF |
| Ground bond resistance measurement | Range | 10～7500 mV |
| Accuracy | ±（3%×reading+ 50mV） | |
| Leakage Current test | ||
| Leakage current test type setting | Single phase load, static/dynamic leakage current | |
| MD network selection | Standard IEC 60335-1 figure 4 network；other test network optional | |
| Alarming limits Setting | Current upper-limit range | 0.050～9.999mA |
| Current lower-limit range | 0.000～5.000mA | |
| Leakage current compensation setting | Range | 0.000～1.000mA, automatic testing, compensation can be set to ON/OFF |
| Time test setting | Range | 1～999s |
| Accuracy | ±（0.1%×setting+1count） | |
| Leakage current measurement | Range | 0.050～9.999mA |
| accuracy | DC～10kHz：±（3%×reading+0.010mA） | |
| Output voltage measurement | Range | 60～280V（phase voltage） |
| accuracy | ±（0.5%×reading+2counts） | |
| Run Power Only forAN9651S(F)/ AN9651F(F)/ AN9651B(F) | ||
| Alarming limits setting | Power upper-limit range | 6～6000W |
| Power lower-limit range | 0～6000W | |
| Test time setting | Range | 1～999s |
| Accuracy | ±（0.1%×setting+1count） | |
| Voltage measurement | Range | 60～280V（phase voltage） |
| Accuracy | ±（0.5%×reading+2counts） | |
| Current measurement | Range | 0.030～3.999A, 4.00～25.00A |
| Accuracy | ±（0.5%×reading+2counts） | |
| Active power measurement | Range | 30.0～199.9W:±（0.5%×reading+5W） |
| Accuracy | 200～6000W（or2000W）:±（0.5%×reading+30W） | |
Reviews
There are no reviews yet.