Electrical Safety Tester Desktop

Desktop Electrical Safety Tester, model AN9640A (F) and AN9640B (F) are designed for AC Hipot, Insulation Resistance, Ground Resistance, Leakage Current, Operating Power and Low Voltage Start-up tests.

DEVICE INTRODUCTION VIDEO

Electrical Safety Tester Desktop are designed for AC Hi-pot, Insulation Resistance, Ground Bond Resistance, Leakage Current, Running Power and Low-Voltage Start up tests.

These testers are used to perform the following electrical safety tests required in international standards:

– Ground Bond Resistance Test,

– Insulation Resistance Test,

– AC Hi-pot Test,

– Leakage Current Test.

Related standards: IEC60335, IEC60950, IEC60601, IEC61010, IEC60598, IEC60204, etc.

Features

ground bond test up to 64A AC with resistance measurement up to 600mΩ
insulation test with DC Voltage from 1V up to 1000 VDC (1V steps)，500VA AC Hi-pot capacity(AC 5KV/100mA),short-circuit output current exceeds 200mA.Built-in optional leakage current test network MD card, meeting requirements of different industrial standards Maximum test current of Ground Bond resistance is up to 64A
leakage current measurement in single or three phases, according to all current international standards
AC Hi-pot, Insulation Resistance, Ground Bond resistance, Leakage Current, Running Power, Low-Voltage Start.
power measurement and cos φ measurement
Satisfy latest requirements: Follow the production line developing trends of comprehensive, fast, automation and information. Satisfy quality management,5s management and refit management requirements.
GPIB, RS232, Ethernet, 0-10V, PLC available
ESRS software for quality purposes, traceability and professional reporting

Electrical Safety Tester Desktop Technical Parameters:

AC Hipot test
Booster rated output capacity	AN9640A(F)E				500VA（5000V/100mA)
	AN9640B(F)E				100VA（5000V/20mA）
Booster maximum short-circuit current					>200mA
Output waveform					Sine wave, <3%（pure resistance，5000V/1mA），<3%（From empty load to full load）
distortion and regulation
Output voltage setting		Range			500～5000V
		Resolution			5V
		Accuracy			±（3%×setting+10V）
Frequency setting		Range			50Hz/60Hz
		Accuracy			±0.1%×setting
Alarming limits setting		Current upper-limit			0.10～99.99mA(20.00mA for AN9640B/C(F))
		Current lower-limit			0.00～10.00mA
Compensation current setting		Range			0.00～10.00mA, automatic testing, compensation can be set to ON/OFF
Time setting		Range			1～999s
		Ramp up time range			1～100s
		Accuracy			±（0.1%×setting+1count）
Breakdown current alarm		Range			0.10～99.99mA(20.00mA for AN9640B/C(F))
		Accuracy			±（3%×reading+3counts）
Insulation Resistance test
Rated output capacity				2VA（1000V/2mA）
Output voltage regulation				<3%（From no load to full load）
Output voltage ripple				<1%
Output voltage setting		Range		DC 500Vor1000V
		Accuracy		±（3%×setting+3counts）
Alarming limits setting		Resistance upper-limit range		0.0～99.9 MΩ，100～2000MΩ（If upper-limit is set to 0, it will not make adjustment for upper limit ）
		Resistance lower-limit range		0.3～99.9 MΩ, 100～2000MΩ
Time setting		Range		1～999s
		Accuracy		±（0.1%×setting+1count）
Insulation resistance measurement		Range		0.0～99.9 MΩ, 100～2000 MΩ
		Accuracy		≤200MΩ: ±（3%×reading+3counts）

*Remarks：Except 500V and 1000V voltage points, other voltage accuracy are all 10%.* Insulation resistance accuracy is under temperature 0～40℃ ， humidity 40℃/（20～75）% RH，otherwise the accuracy will change.
Ground Bond Resistance test
No load output voltage				<12V
Output current setting		Range		3～30A
		Accuracy		±（3%×setting+0.2A）
Current frequency setting		Range		Sine waveform 50Hz/60Hz
		Accuracy		±0.1%×setting
Test time setting		Range		1～999s
		Accuracy		±（0.1%×setting+1count）
Result display mode				Ground resistance or voltage
Ground resistance display mode：
Alarming limits setting		Resistance upper-limit range		3A≤output current≤10A:10～600 mΩ


		Resistance lower-limit range		0～100 mΩ
Compensation resistance setting		Range		0～200 mΩ, automatic testing, compensation can be set to ON/OFF
Ground bond resistance measurement		Range		10～600 mΩ
		Accuracy		±（3%×reading+ 5counts）
Ground voltage display mode:
Alarming limits setting		Voltage upper-limit range		30～7500 mV
		Voltage lower-limit range		0～3000 mV
Compensation voltage setting		Range		0～1000 mV, automatic testing, compensation can be set to ON/OFF
Ground bond resistance measurement		Range		10～7500 mV
		Accuracy		±（3%×reading+ 50mV）
DUT power control
DUT input power requirements				Leakage current, running power and voltage start test, user shall provide the correct input power input to safety tester, recommend to use AN97 frequency conversion power supply
Input voltage, frequency				0～300V（phase voltage）, 45～65Hz
Isolation transformer output voltage ratio		Leakage current test		1.06 times rated voltage
		Running Power test		1.00 times rated voltage
		Voltage start test		0.85 times rated voltage
DUT Capacity				Single phase, AN9640A(F) load capacity is 6 KVA
				AN9640B(F)/AN9640C(F) load capacity is 2KVA
Over current protection				Max current 30A, after the over current 5s，automatically cut off the isolation transformer.
Interface
Remote interface				Standard, foot pedal(start/stop)
Alarming lamp interface				Standard, 3 colour light（test pass/fail）
Communication interface				Standard RS232，internet, RS485, GPIB optional
97 Power supply control interface				Standard，combine with AN97 series frequency conversion power
PLC interface				Optional, start、stop、test、pass、fail output
Printer interface				Optional
Gross Weight				About 50kg
Dimension			With packing	600(W)x385(H)x820(D)
			Without packing	426(W)x 178(H)x 600(D)