Vessel For Drop Test

Vessel For Drop Test meets the standards of EN/IEC 60335-2-6, Clause 21.102 and EN/IEC 60335-2-9, Clause 21.101.

This vessel is used to verify the resistance of hob surfaces made of glass-ceramic or similar materials to the expected stresses in normal use.

SPECIFICATIONS:

The diameter of the vessel is 120 mm ± 10 mm. Made of aluminium. The edges are rounded at a radius of 10 mm. It has a flat base.

Vessel For Drop Test procedure:

The vessel uniformly filled with at least 1,3 kg of sand or shot so that the total mass is 1,80 kg ± 0,01 kg. For induction wok elements, the vessel is the wok specified in 3.1.9.101. It is uniformly filled with sand or shot so that the total mass is 1,80 kg ± 0,01 kg.