PARAMETERS
Mass:4.5kg;
it is made of Stainless steel;
Size:Ф100.5×85.3 mm
Load for Testing Rotating Spits
Load for Testing Rotating Spits meets the standards of EN/IEC 60335-2-9 clause 3.1.9.102 figure 102 and EN/IEC 60335-2-6 clause 3.1.9.104 figure 103.
Load for Testing Rotating Spits is designed to simulate the food to be cooked by attaching to rotary grills in the ovens or grills during heating tests.
Related products
Inclined Plane
Inclined Plane meets the standard of EN/IEC 60335-1 Clause 20.1. Inclined Plane is designed to verify whether the appliances intended to be used on floor or table type surfaces have adequate stability.
Scratch Tester
Scratch Tester meets the standards of EN/IEC 60335-1 clause 21.2 and EN/IEC 60950 clause 2.10.8.4
Scratch Tester is designed to test whether accessible parts of the solid insulation are scratched and have sufficient strength to prevent the penetration of sharp implements.
Scratch Tester can also be used to check the abrasion resistance of printed coated circuit boards.
Test Equipment for Toasters
Test Equipment for Toasters meets the standard of EN/IEC 60335-2-9 Clause 19. 101.
Test Equipment for Toasters is designed to verify the durability of the ejector mechanism of the toaster.
Vessel For Drop Test
Vessel For Drop Test meets the standards of EN/IEC 60335-2-6, Clause 21.102 and EN/IEC 60335-2-9, Clause 21.101.
This vessel is used to verify the resistance of hob surfaces made of glass-ceramic or similar materials to the expected stresses in normal use.
Cord Reel Tester
Cord Reel Tester meets the standard of EN/IEC 60335-1 Clause 22.16.
It is used to check the automatic cord reels shall be constructed so that they do not cause
– undue abrasion or damage to the sheath of the flexible cord;
– breakage of conductor strands;
– undue wear of contacts.
Cord Anchorage Force & Torque Tester
Cord Anchorage Force & Torque Tester meets the standard of EN/IEC 60335-1 Clause 25.15
Cord Anchorage Force & Torque Tester is designed to verify whether the cord anchorage used in the appliances provided with a flexible cord protects the conductors at the terminals from excessive stresses and protects the conductive insulation against abrasion.
Washing Machine Door Opening and Closing Tester
Washing Machine Door Opening and Closing Tester meets the standards of EN/IEC 60335-2-7, Clause 18.101 and EN/IEC 60335-2-4, Clause 18.
Washing Machine Door Opening and Closing Tester is designed to verify the durability of the door or door interlock during normal use of washing machines and spin extractors.
Thermocouple Welding Machine
Thermocouple Welding Machine is designed for welding of K, J and T type thermocouple wire ends. Thermocouple or thermocouple is a kind of temperature sensor.
Reviews
There are no reviews yet.