Impulse Voltage Tester meets the standard of EN/IEC 60335-1 Clause 14, It is used to detect the transient over voltage of the components and the electrical clearance and the creepage distance.
– 7-inch touch LCD interface, rich in functions, easy to operate, easy to upgrade software.
– Intelligent programmable high voltage power supply, built-in high voltage over voltage, over current and short circuit protection.
– Output intelligent detection, voltage error, no output warning.
Impulse Voltage Tester Technical Parameters
| Output voltage | 12kV ( Max ) ± 5% | |
| Impulse wave front time | 1.2μs ± 30% | |
| Half value of after wave time | 50μs ± 20% | |
| Capacitance | 0.8U | |
| Output polarity | Positive, negative, positive and negative cycle | |
| Output resistance (optional) | 2Ω, 500Ω ± 10% | 12Ω, 500 Ω± 10% |
| Impact mode | Automatic or manual | |
| Impact cycles | 1-9999 | |
| Impact interval time | 3-999s (3s of which is the inherent charging time of the device) | |
| Power source | AC220 ± 10%，50/60 Hz | |
| Dimension | 470mm × 260mm × 500mm | |
| Weight | 30kg | |
GENERAL INFORMATION
What is Pulse Voltage?
Impulse Voltage; It is a single-pole, high-frequency voltage type that rapidly rises to a peak value and then quickly drops to zero.
Impulse Voltage Test
Lightning impact tests are carried out in order to determine to what extent high voltage devices are affected by lightning. In order to carry out these tests, impulse voltages are produced in the laboratory environment. In other words, impulse voltage is a type of voltage created in a laboratory environment to simulate high voltage.
Standards
- TS EN 60335-1
- TS EN 62271-200
- TS EN 62271-1
- TS EN 60060
- TS EN 62305
- TS EN 62561
- TS EN 60076
Reviews
There are no reviews yet.