Flexing Test Apparatus meets the standards of EN/IEC 600335-1 Clause 25.14 Figure 8, EN/ IEC 60335-2-3, EN/ IEC 60335-2-8, EN/ IEC 60335-2-14 and EN/ IEC 60335-2-23.
Flexing Test Apparatus is designed to verify that the household electrical appliances provided with a supply cord and that are moved while in operation in accordance with their standards are manufactured in such a way as to provide adequate protection against excessive flexing where it enters the appliance.
Household electrical appliances where this test is applied:
Electric Irons, Shavers, Blenders, Food Mixers, Hairdryers, Curling Combs, Soldering Irons and similar.
Flexing Test Apparatus SPECIFICATIONS:
The apparatus allows to adjust the number of flexing (Maximum 999999 times); The test can be stopped automatically; The number of flexing is counted automatically. When the number of bending reaches the preset value, the apparatus switches off automatically and gives an audible signal indicating that the test has ended. Tests can be carried out both by conducting current through conductors and without load. One end of the conductors is connected to the Load Box when the current is passed.
Technical Parameters
Number of work stations | 4 |
Flexing angle | 45 degrees to the right and left, 180 degrees to the two sides. It is adjustable |
Flexing speed | 0 ~ 60 rpm |
Weight of loads | 20 N x 6 and 113 g x 6, 284 g x 4 (adjustable) |
Counting | 1 counter per stand independent station. Total 4 counters. |
Mechanical working principle | The sliding crank movement on the slowdown box is driven by the motor. |
Disconnection instructions | LED display buzzer alarm |
Dimensions | L 870 mm x W 610 mm x H 820 mm |
Supply Specifications | 220-240V, 50/60Hz; 110V, 60Hz. |
Reviews
There are no reviews yet.