High Voltage Stationary Stand | DTE 15-4D

Сircuit Breaker Testing Device  is intended for operability testing and ampere-second characteristics monitoring of circuit breakers by power frequency AC in the range 20A – 20kA. It is capable to measure and record time and values of current transmitted through the circuit breaker, hereinafter – CB. It can be used as a controlled power source of AC up to 20kA in low impedance power circuits.

High Voltage Digital Diode Device | DTE 70/50 is intended for testing and certification of high-voltage cables and dielectric insulators on distribution points of electrical networks and transformer substations, as part of mobile electrical laboratory. It can be used in stationary electrophysical laboratories as a high voltage source for solid dielectrics testing. DTE-70/50D is a highly reliable time-tested metrological device. The digital panel device measures the dielectrics leakage current in both DC and AC voltage modes, which significantly increases the device application area.

High Voltage Rectifying Device DTE-20/50kV is made as monoblock unit and is intended to supply a variety of technological and laboratory devices with bipolar rectified electric voltage in the values range from 0 to ± 25 kV. The device is designed for use in stationary conditions indoors at operating temperatures from -10 °C to + 40 °C, up to 80% relative air humidity at +20°C and atmospheric pressure 84.0 – 106.7 kPa (630 – 800 mm. Hg. v.).

High Voltage Diode Device | DTE 70/50  is intended for testing and certification of high-voltage cables and dielectric insulators on distribution points of electrical networks and transformer substations, as part of mobile electrical laboratory. It can be used in stationary electrophysical laboratories as a high voltage source for solid dielectrics testing.