Stand allows testing of
- Rubber insulating gloves;
- Dielectric rubber boots and galoshes;
- Fitting and mounting tool with insulated handles (screwdrivers, wire cutters, pliers, etc.).
The stand can be used as a high voltage AC test system for insulation testing of such products as cables, insulators, etc.
Technical specifications
| Parameter name | Value | |||
| Power supply AC voltage | 220 V ± 10% | |||
| Power supply frequency | 50 Hz ± 1 | |||
| Power consumption, at most | 0,9 kW | |||
| Operation mode | «100 V» | «15 kV» | «100 kV» | |
| Effective value of the maximum testing voltage | 0,1 kV | 15 kV | 100 kV | |
| Reduced voltage measurement error | ± 3 % | |||
| Testing seats quantity | 1 | 4 | 10* | |
| Maximum measured leakage current, mA | not measured | 7,6 | 20 | |
| Reduced current measurement error | — | ± 3 % | ||
| Control unit weight, at most | 18,5 kg | |||
| High voltage unit HVU-50 weight, at most | 42,5 kg | |||
| Testing bath weight, at most | 32 kg | |||
| Average service life | 10 years | |||
| Recommended area occupied by the stand, m | 3 X 5 | |||
Dimensions
| CU overall dimensions, mm | 415х220х360 |
| Overall dimensions of the testing bath, mm | 730х1060х450 |
| Overall dimensions of high voltage source HVU-50, mm | 365х670х295 |
| Recommended area occupied by the stand, m | 3 х 5 |
Reviews
There are no reviews yet.