Previous product
circuit breaker testing device dte 10m
Сircuit Breaker Testing Device | DTE-10M
Back to products
Next product
relay protection testing device dte 450 3000
Relay Protection Testing Device | DTE 450/3000
circuit breaker testing device dte 3m
circuit breaker testing device dte 3m
Click to enlarge

Сircuit Breaker Testing Device | DTE-3M

The DTE-3M circuit breaker test device, in the following description of the “device”, is intended:

Teklif Al
 
SKU: DTE-3ME Category:
Description
  • To check the operability and control of the ampere-seconds characteristics of AC circuit-breakers of the industrial frequency in the range 20A-3kA, with measurement and recording of the time and current values ​​passed through the circuit breaker;
  • For checking and attestation of current measuring and protective current transformers, primary current;
  • To check and calibrate current relays;
  • To check and calibrate the thermal current relay;
  • To test fuses;

Can be used as a regulated AC power source up to 3kA in low impedance power circuits for laboratory work.

Device DTE-3M is a portable device.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Сircuit Breaker Testing Device | DTE-3M”

Your email address will not be published. Required fields are marked *

Related products

high voltage stationary stand dte 15-4d
high voltage stationary stand dte 15-4d
Close

High Voltage Stationary Stand | DTE 15-4D

High voltage Stationary Stand | DTE 15-4D is designed for the following works:
  • Tests of dielectric rubber gloves, a bot, electric tools, etc. Variable high voltage industrial frequency, adjustable within 100V – 15kV.
  • Checks of neon lamps with variable voltage of industrial frequency, adjustable within 5 – 250V.
Features of the stand – the use of a “dry” high-voltage transformer in a set of test bath installation.
Read more
Quick view
high voltage rectifying device dte 20 50
high voltage rectifying device dte 20 50
Close

High Voltage Rectifying Device | DTE 20/50kV

High Voltage Rectifying Device DTE-20/50kV is made as monoblock unit and is intended to supply a variety of technological and laboratory devices with bipolar rectified electric voltage in the values range from 0 to ± 25 kV. The device is designed for use in stationary conditions indoors at operating temperatures from -10 °C to + 40 °C, up to 80% relative air humidity at +20°C and atmospheric pressure 84.0 – 106.7 kPa (630 – 800 mm. Hg. v.).
Read more
Quick view
dielectrics testing
Close

High Voltage Test System for Solid Dielectrics Testing

High Voltage Test System for Solid Dielectrics Testing
  1. Testing the high-voltage cables and the cables sheaths with 6,10,15,20 kW operating voltage and all types insulation such as XLPE and PILC.
  2. Testing insulators and other electric equipment by high voltage power frequency AC.
  3. Testing high-voltage switches’ vacuum chambers.
  4. Laboratory and research works.
Features: The test system contains a few units, which are easy to carry and use. For example, only one high-voltage unit without the switching unit is needed for testing the transformer substations’ isolators. The system includes a convenient and maneuverable transport cart.
Read more
Quick view
drying apparatus for dielectric protective equipment
drying apparatus for dielectric protective equipment
Close

Drying Apparatus for Dielectric Protective Equipment

Drying Apparatus for Dielectric Protective Equipment is designed for simultaneous drying of dielectric gloves – 18 pcs. and dielectric boots – 8 pcs.
Read more
Quick view
high voltage stationary stand dte 100d
high voltage stationary stand dte 100d
Close

High Voltage Stationary Stand | DTE-100D

High Voltage Stationary Stand DTE-100D  is designed for acceptance and maintenance testing of electric protective equipment used in electrical installations.
Read more
Quick view
circuit breaker testing device dte 20m
circuit breaker testing device dte 20m
Close

Сircuit Breaker Testing Device | DTE 20M

Сircuit Breaker Testing Device  is intended for operability testing and ampere-second characteristics monitoring of circuit breakers by power frequency AC in the range 20A – 20kA. It is capable to measure and record time and values of current transmitted through the circuit breaker, hereinafter – CB. It can be used as a controlled power source of AC up to 20kA in low impedance power circuits.
Read more
Quick view
circuit breaker testing device dte 10m
circuit breaker testing device dte 10m
Close

Сircuit Breaker Testing Device | DTE-10M

Сircuit Breaker Testing Device | DTE-10M is intended for testing and certification of high-voltage cables and dielectric insulators on distribution points of electrical networks and transformer substations, as part of mobile electrical laboratory. It can be used in stationary electrophysical laboratories as a high voltage source for solid dielectrics testing.
Read more
Quick view
relay protection testing device dte 450 3000
relay protection testing device dte 450 3000
Close

Relay Protection Testing Device | DTE 450/3000

Relay Protection Testing Device DTE–450/3000 (hereinafter – device) is intended for
  • adjustment and testing of simple relay protection (RPA) in place of their installation at power plants, substations, industrial plants or in the laboratory
  • adjustment and testing of electroautomatics elements (electromagnetic relays, contactors, motor starters, etc.)
  • adjustment and testing of circuit breakers
The device is implemented within single body, which creates additional convenience during use. It includes connecting wires and cables to connect testing devices.
Read more
Quick view