Features:
– Suitable for current connections up to 30 Amp.
– It is nickel plated on 59% copper.
– Available in red, black, yellow and green.
Related products
Certified Silver Foil
Certified Silver Foil Delivered certified by American ED&D. By making 1 mm cuts, approximately 90 -100 silver foil can be obtained from a strip.
Shunt Resistance
Shunt Resistance is a type of resistor that allows a large portion of the current to be measured to pass over the measuring instrument when we want to measure a large current.
High Voltage Cable
High Voltage Cable These silicone rubber insulated cables are designed to be used in high voltage tests of 2 kV, 5 kV, 10 kV, 20kV, 30kV, 40kV, 50kV.
50W 500W and Flame Burner
50W 500W and Flame Burner meet the standards of EN/IEC 60695-11-3, Clause 4.2.1, Figure A.1 and EN/IEC 60695-11-4, Clause 4.2.1, Figure A.1 and Figure A.2.
Copper Block for 500W Flame Verification
Copper Block for 500W Flame Verification meets the standard of IEC 60695-11-3 Clause 4.2.5, Figure 2. It is supplied with 0.5 mm outer diameter, mineral insulated thermocouple.
Test Device Accessories
Test Device Accessories High-voltage cable, high-voltage gun, high-voltage probe, current pliers, connector, clips, crocodile tongs, resistance box etc.
Thermocouple to Measure Glow Wire Tip Temperature
Thermocouple to Measure Glow Wire Tip Temperature accessory meets the standard of EN/IEC 60695-2-10 Clause 4.3. It is designed to measure the tip temperature of the glow wire.
Silver Foil
Silver Foil accessory meets the standard of EN/IEC 60695-2-10, Clause 5. This is used to verify the glow wire tip temperature.
