Features:
– Suitable for current connections up to 200 Amp.
– It is nickel plated on 59% copper.
– Available in red, black, yellow and green.
Related products
The Clip With Crocodile Tooth | 50A
The Clip With Crocodile Tooth | 50A is a perfectly designed accessory for test equipment that can be used in high current connections up to 50 Amp.
Thermocouple to Measure Glow Wire Tip Temperature
Thermocouple to Measure Glow Wire Tip Temperature accessory meets the standard of EN/IEC 60695-2-10 Clause 4.3. It is designed to measure the tip temperature of the glow wire.
Test Device Accessories
Test Device Accessories High-voltage cable, high-voltage gun, high-voltage probe, current pliers, connector, clips, crocodile tongs, resistance box etc.
50W 500W and Flame Burner
50W 500W and Flame Burner meet the standards of EN/IEC 60695-11-3, Clause 4.2.1, Figure A.1 and EN/IEC 60695-11-4, Clause 4.2.1, Figure A.1 and Figure A.2.
Shunt Resistance
Shunt Resistance is a type of resistor that allows a large portion of the current to be measured to pass over the measuring instrument when we want to measure a large current.
The Clip With Crocodile Tooth | 30 A
The Clip With Crocodile Tooth | 30 A is a perfectly designed accessory for test equipment that can be used in high current connections up to 30 Amp.
High Voltage Cable
High Voltage Cable These silicone rubber insulated cables are designed to be used in high voltage tests of 2 kV, 5 kV, 10 kV, 20kV, 30kV, 40kV, 50kV.
Copper Block for 500W Flame Verification
Copper Block for 500W Flame Verification meets the standard of IEC 60695-11-3 Clause 4.2.5, Figure 2. It is supplied with 0.5 mm outer diameter, mineral insulated thermocouple.
