Technical Specification:
– Approximately area: 2 mm2
– Approximately thick: 0,06 mm
– Purity: > % 99,8
– Melting point: 960 °C ±10 °C.
Silver Foil
Silver Foil accessory meets the standard of EN/IEC 60695-2-10, Clause 5. This is used to verify the glow wire tip temperature.
Related products
Certified Silver Foil
Certified Silver Foil Delivered certified by American ED&D.
Crocodile Mouth Current Clamp | 300 A
Crocodile Mouth Current Clamp | 300 A is a perfectly designed accessory for test equipment that can be used in high current connections up to 300 Amp.
50W 500W and Flame Burner
50W 500W and Flame Burner meet the standards of EN/IEC 60695-11-3, Clause 4.2.1, Figure A.1 and EN/IEC 60695-11-4, Clause 4.2.1, Figure A.1 and Figure A.2.
Thermocouple to Measure Glow Wire Tip Temperature
Thermocouple to Measure Glow Wire Tip Temperature accessory meets the standard of EN/IEC 60695-2-10 Clause 4.3. It is designed to measure the tip temperature of the glow wire.
The Clip With Crocodile Tooth | 50A
The Clip With Crocodile Tooth | 50A is a perfectly designed accessory for test equipment that can be used in high current connections up to 50 Amp.
Shunt Resistance
Shunt Resistance is a type of resistor that allows a large portion of the current to be measured to pass over the measuring instrument when we want to measure a large current.
Crocodile Mouth Current Clamp | 200 A
Crocodile Mouth Current Clamp | 200 A is a perfectly designed accessory for test equipment that can be used in high current connections up to 200 Amp.
Wrapping Paper and Wooden Board
Wrapping Paper and Wooden Board meet the standards of IEC 60695-2-10 Clause 4.4 and IEC 60695-11-5 Clause 5.4. These are used on Glow Wire Test and Needle Flame Test.
Reviews
There are no reviews yet.